Displays and Controls
30
Front Panel
All the controls on the front panel are explained and/or referenced here. To open the front panel push gently
on the lower third of the panel.
1 MULTI JOG dial
You can use this dial for many purposes. When
you press the SET UP button (13), you can use it
to perform SYSTEM SETUP operations; select a
function or a listening mode or do TUNER EDIT
functions (in TUNER mode).
2
STANDBY/ON button
Press to switch the receiver ON or into STANDBY
mode.
3 Listening mode buttons (page 47)
There are two types of SURROUND modes:
MOVIE:
Press to put the receiver into MOVIE
mode (see page 48).
MUSIC:
Press to put the receiver into MUSIC
mode (see page 49).
STEREO/DIRECT (see page 47):
Switches the
receiver into STEREO mode if it was in a different
sound mode or toggles between DIRECT and
STEREO mode.
4 ENTER button
Use this button to enter information concerning
the SYSTEM SETUP, listening mode or the tuner.
5 STANDBY indicator
Lights when the receiver is in STANDBY mode.
(Please note that this receiver consumes a small
amount of power [0.8 W] in the standby mode.)
6 Remote sensor
Receives the signals from the remote control.
7 Display (see page 35)
8 MCACC indicator (see pages 13 and 51)
Lights when the ACOUSTIC CAL EQ is on. (After
the Auto Surround Sound Setup has been
completed the ACOUSTIC CAL EQ is set on and
this display will light.)
9 i.LINK indicator
Lights when an i.LINK -Audio-equipped
component is selected.
Displays & Controls
Displays and Controls
VSX-55TXi.book Page 30 Tuesday, April 8, 2003 12:07 AM
