Listening to your system
05
32
En
• If you press
ADV. SURR
when the headphones are
connected, the
PhonesSurround
mode will
automatically be selected.
• You can’t use the Advanced Surround effects with
88.2/96kHz PCM or DTS 96kHz/24 bit sources.
Tip
• When an Advanced Surround listening mode is
selected, the effect level can be adjusted in the range
of
10
to
90
by pressing
EFFECT/CH SEL
(until
EFFECT
shows in the display). The effect level can be set for
each Advanced Surround mode by pressing
+
/
–
.
Dolby Pro Logic IIx Music settings
When listening to 2-channel sources in Dolby Pro Logic
IIx Music mode, there are three further parameters you
can adjust: Center Width, Dimension, and Panorama.
1
With ‘
2
Pro Logic IIx MUSIC’ mode active, press
EFFECT/CH SEL repeatedly to select CENTER WIDTH,
DIMENSION or PANORAMA.
•
CENTER WIDTH
– Provides a better blend of the front
speakers by spreading the center channel between
the front right and left speakers, making it sound
wider (higher settings) or narrower (lower settings).
(This is applicable only when using a center speaker.)
•
DIMENSION
– Adjusts the depth of the surround
sound balance from front to back, making the sound
more distant (minus settings), or more forward
(positive settings).
•
PANORAMA
– Extends the front stereo image to
include the surround speakers for a ‘wraparound’
effect.
2
Use the +/– buttons to adjust the setting.
Center Width is adjustable between
0
and
7
(default :
3
);
Dimension between
–3
and
+3
(default :
0
); Panorama is
On
or
Off
(default :
Off
).
3
Press EFFECT/CH SEL again to adjust other
settings.
Note
• If the Extended mode is switched off,
2
Pro Logic IIx
(above) becomes
2
Pro Logic II
(5.1 channel
sound), however the above setting will still be
effective.
Neo:6 Music settings
• Default setting:
2
When listening to 2-channel sources in Neo:6 Music
mode, you can adjust the center image to create a wider
stereo effect with vocals. Note that this is only available
when using a center speaker.
1
With Neo:6 MUSIC mode active, press EFFECT/CH
SEL repeatedly to select C. IMAGE.
2
Use the +/– buttons to adjust the setting.
Adjust the effect from
0
(all center channel sent to front
right and left speakers) to
5
(center channel sent to the
center speaker only).
Listening in stereo
When you select
STEREO
or
DIRECT
, you will hear the
source through just the front left and right speakers (and
possibly your subwoofer depending on your speaker
settings). Dolby Digital and DTS multichannel sources
are downmixed to stereo.
•
While listening to a source, press STEREO for
stereo playback.
Press repeatedly to switch between:
•
STEREO
– The audio is heard with your surround
settings (such as channel level) and you can still use
digital processing (such as the Midnight, Loudness,
and Tone control functions).
•
DIRECT
– Bypass all effects and surround settings so
that the audio remains as close to the source audio
signal as possible.
Note
• If you switch on any signal processing features (for
example, the Midnight listening mode or the tone
controls) when
DIRECT
is selected, the receiver
automatically switches to
STEREO
.
RECEIVER CONTROL
SHIFT
THX
SLEEP
DIALOG E
AUTO SURR
STANDARD
ADV.SURR
STEREO
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
HDD
CH
CH
DVD
RECEIVER
RECEIVER CONTROL
SHIFT
THX
SLEEP
DIALOG E
AUTO SURR
STANDARD
ADV.SURR
STEREO
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
HDD
CH
CH
DVD
RECEIVER
RECEIVER CONTROL
SHIFT
THX
SLEEP
DIALOG E
AUTO SURR
STANDARD
ADV.SURR
STEREO
MPX
AUDIO
CH RETURN
SUBTITLE
MIDNIGHT/
LOUDNESS
SIGNAL
SELECT
EFFECT
/CH SEL
ACOUSTIC
EQ
HDD
CH
CH
DVD
RECEIVER
VSX_52TX.book.fm 32 ページ ２００４年５月１４日 金曜日 午前９時２１分
