Pioneer Elite VSX-36TX Operating Instructions Manual Download Page 88

Page: 88 / 92

Cause

• Either the digital connections or the

DIGITAL IN SELECT choices are
incorrect.

• The TAPE2 MONITOR mode is ON.

• You are not using a source with

Surround EX flag.

• The player is paused or stopped.
• There is a mistake in the player

settings for audio output.

• Although it's a Dolby Digital / DTS

source there is a possibility the
present track is not Dolby Digital /
DTS.

Remedy

• Make sure the digital connections and

the DIGITAL IN SELECT choices are
done correctly.

• Press the TAPE2 MONITOR button so

it goes into the OFF setting.

• There is no problem with your

receiver but if you want to hear 7
channel sound use an Surround EX
source.

• Play the source.
• Fix the audio settings (check the

manual that came with your DVD
player.

• There is no problem. The indicator

won't light when the track is not a
Dolby Digital / DTS track.

Symptom

You can't get DIGITAL to come
up when using the SIGNAL
SELECT button.

When using THX AUTO mode
the receiver is not playing in the
EX mode.

The Dolby Digital / DTS
indicator doesn't light up even
when playing a Dolby Digital /
DTS source.

If the unit does not operate normally due to external effects such as static electricity

Disconnect the power plug from the outlet and insert again to return to normal operating conditions.

Techno Tidbits & Problem-solving

Summary of Contents for Elite VSX-36TX





























































































Search results

Summary of Contents for Elite VSX-36TX

Reviews:

Related manuals for Elite VSX-36TX

Brands by name

Popular brands

Pioneer Elite VSX-36TX, Operating Instructions Manual

Search results

Summary of Contents for Elite VSX-36TX

Reviews:

Related manuals for Elite VSX-36TX

Brands by name

Popular brands