Pioneer Elite SC-LX704 Instruction Manual Download Page 28

Page: 28 / 225

≫

≫

≫

≫

≫

≫

Dolby Enabled Speakers (Dolby Speakers)

Installation Example













a: 22° to 30°, b: 90° to 110°, c: 135° to 150°

This is a system with the 7.1 channel system (

p20

) consisting of front

speakers, a center speaker, surround speakers, surround back speakers and a

powered subwoofer, and added Dolby enabled speakers (front), Dolby enabled

speakers (surround) or Dolby enabled speakers (surround back) combined.

Dolby enabled speakers are special speakers designed to face the ceiling, so

that the sound is heard from overhead by bouncing the sound off the ceiling.

Installing the height speakers will enrich the sound field feeling in the upper

space.

Install them either on the front speakers, on the surround speakers or on the

surround back speakers.

9,10 Height Speakers

Choose one of the following:

•

Dolby Enabled Speakers (Front)

•

Dolby Enabled Speakers (Surround)

• Dolby Enabled Speakers (Surround Back)

Speaker Layouts and Selectable Listening

Modes (

p136

)

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands