Pioneer Elite SC-72 Operating Instructions Manual Download Page 11

Page: 11 / 119

Before you start

Installing AVNavigator for Mac

1  Download “AVNavigator 2013.pkg” from http://www.pioneerelectronics.com.
2  Launch “AVNavigator 2013.pkg” from the “Downloads” folder.
3  Follow the instructions on the screen to install.

Operating Environment

AVNavigator can be used with Mac OS X (10.7 or 10.8).

A browser is at times used for AVNavigator functions. The supported browser is Safari 6.0.

Using AVNavigator for Mac

1 Launch “AVNavigator 2013”.

The file is located in the “

Applications

” folder just under the hard disk (

Macintosh HD

2 Select and use the desired function.

For details, see

Using AVNavigator for Windows

page 10

. The Mac OS version includes the same types of

functions.

Deleting the AVNavigator

You can use the following method to uninstall (delete) the AVNavigator from your Mac.

1 Delete “AVNavigator 2013”.

The file is located in the “

Applications

” folder just under the hard disk (

Macintosh HD

2 Delete the “jp.co.pioneer.AVNavigator 2013” folder.

The folder is located in the hard disk (

Macintosh HD

)

“

Library

” folder

“

Application Support

” folder.

Summary of Contents for Elite SC-72
























































































































Search results

Summary of Contents for Elite SC-72

Reviews:

Related manuals for Elite SC-72

Brands by name

Popular brands

Pioneer Elite SC-72, Operating Instructions Manual

Search results

Summary of Contents for Elite SC-72

Reviews:

Related manuals for Elite SC-72

Brands by name

Popular brands