S-W1EX
5
5
6
7
8
5
6
7
8
C
D
F
A
B
E
1. SPECIFICATIONS
Accessories
• Power cable
(ADG7097: /LF)
• Power cable
(ADG1154: /MLT)
• Spikes (x4)
(SBA6019)
• Operating Instructions (SRD6032: /LF)
(SRD6031: /MLT)
• Bases (x4)
(SEA6039)
• Ground cord
(SDF6004)
• RCA plug cord
(SDE6001)
Cabinet ........... Floor type with PASSIVE RADIATOR system
(Magnetically shielded)
Woofer ...................................................... 30 cm cone type
PASSIVE RADIATOR .............................. 30 cm cone type
Frequency response .............. 25 - 4,000Hz(set to BYPASS)
Power Amplifier Continuous Power Output (RMS)
........................................................... 250 W/4
Ω
(100 Hz)
Input (sensitivity at 100 Hz/ impedance)
SPEAKER LEVEL ............................ 1.6 V + 1.6 V/15 k
Ω
(both channels in-phase)
LINE LEVEL (RCA jack) ............................. 160 mV/50 k
Ω
Output (Level at 100 Hz/ impedance)
LINE LEVEL (RCA jack) ............................... 160 mV/1 k
Ω
CROSSOVER Frequency
..................................... 50 - 150 Hz (continuously variable)
Outline Dimension .......... 430 (W) x 480 (H) x 430 (D) mm
Weight (without package) ........................................ 34.5 kg
Power Requirements (MLTXTW)
220 - 230 V~, 50/60 Hz
Power Requirements (LFXTW)
110V~, 50/60 Hz
Power Consumption .................................................. 56 W
Accessories ...................................................... Spikes x 4
Bases x 4
RCA plug cord x 1
Power cable x 1
Ground cord x 1
Operating instructions x 1
NOTE:
Specifications and design subject to possible
modification without notice, due to improvements.
is a trademark placed on a product with
Pioneer's Phase Control Technology.
The Technology enables high-grade 5.1ch
with no delay in the bass area.
Above specifications are for when power supply is 230 V.
•
This speaker system is magnetically shielded.
However, depending on the installation location,
color distortion may occur if the speaker system is
installed extremely close to the screen of a television
set.
If this happens, turn off the power switch of the
television set, and turn it on after 15 to 30 minutes.
If the problem persists, place the speaker system
away from the television set.
*
Maunfactured under license from Dolby Laboratories.
”Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.