DVR-RT502-S
107
5
7
8
5
6
7
8
C
D
F
A
B
E
2-9: CASSETTE OPENER/PINCH ROLLER
BLOCK/P5 ARM ASSY (Refer to Fig. 2-9-A)
1. Unlock the support
1
and remove the Cassette Opener.
2. Remove the Pinch Roller Block and P5 Arm Assy.
NOTE:
1. Do not touch the Pinch Roller. (Use gloves.)
2. In case of the Pinch Roller Block and the Pinch Roller
Cam installation, install correctly as Fig. 2-9-B.
2-11: A/C HEAD (Refer to Fig. 2-10-A)
1. Remove the screw
1
.
2. Remove the A/C Head Base.
3. Remove the 3 screws
2
.
4. Remove the A/C Head and A/C Head Spring.
NOTE:
1. Do not touch the A/C Head. (Use gloves.)
2. When you install the A/C Head Spring, install as shown
in Fig. 2-11-B.
3. When you install the A/C Head, tighten the screw (1)
first, then tighten the screw (2), finally tighten the screw
(3).
2-11: FE HEAD (RECORDER ONLY)
(Refer to Fig. 2-11)
1. Remove the screw
1
.
2. Remove the FE Head.
2-12: CYLINDER UNIT ASSY
(Refer to Fig. 2-12)
1. Disconnect the following connector: (CD2001)
2. Remove the 3 screws
2
.
3. Remove the Cylinder Unit Assy.
NOTE:
1. When you install the Cylinder Unit Assy, tighten the
screws from (1) to (3) in order while pulling the Assy
toward the left front direction.
Fig. 2-9-A
Fig. 2-9-B
Fig. 2-10-A
Fig. 2-10-B
Fig. 2-11
Fig. 2-12
1
1
1
2
2
1
2
2
2
Cassette Opener
FE Head
Pinch Roller Block
P5 Arm Assy
Main Chassis
Spring Position
Can be seen the hole of
the Pinch Roller Cam.
Can be seen the hole of
the Main Cam.
Pinch Roller Block
(1)
(1)
(2)
(3)
(3)
A/C Head
A/C Head Spring
Cylinder Unit Assy
A/C Head Base
P5 Arm Assy
Screw Torque:
5
±
0.5kgf•cm (Screw
1
)
Screw Torque: 3
±
0.5kgf•cm
• Screw Torque: 5
±
0.5kgf•cm
• The FE Head is not installed on the Video Cassette Player.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299