67
En
Editing the disc
06
NOTES:
• It is no problem to omit the
procedures for confirming the
scene or adjusting start and end
points.
• It is not possible to make any
adjustments for 2 seconds after a
title starts or 2 seconds before it
ends.
• To set a start point at the beginning
of a title, set it during countdown.
• The points during editing may be
different from the preview.
• Start and end points are adjusted
in units of 1 second.
5
Press
or
to select “SET START” at the start point of the
scene that you want to erase and press
ENTER
. (To set the start
point easily, search the start point while “SET START” is selected)
The still image at the start point appears at the left small screen.
6
Press
or
to select “SET END” at the end point of the
scene you want to erase and press
ENTER
.
The still image at the end point appears at the right small
screen.
7
Check the erased scenes.
• Select “Preview” and press
ENTER
. Then the video where the
scenes between the start and end points are erased is played
back.
• Each operation button (
F.FWD
,
REW
,
SKIP
6
6
6
6
6
, SKIP
7
7
7
7
7
,
PLAY
,
PAUSE/STILL
) for playback also can be used.
8
Adjust the start and end points.
• To adjust the start point, select “Adjust start” and press
ENTER
. You can change the start point every one frame by
pressing
or
.
• To adjust the end point, select “Adjust end” and press
ENTER
.
You can change the end point in the same way as the start
point.
9
If you determine the scene to be erased, press
or
to
select “Finish” and press
ENTER
.
• A chapter mark is automatically added at the location of the
erased scene.
!"#
! %&'
(
)*
+( )*,
!"
!
!
#$%$&
'()*+ *+#+
'()*+ $,'
,*-
VR mode
2H30301B_En_64_71
8/4/05, 19:25
67
