Pioneer DVR-520H-S, Service Manual

Page: 104 / 174

DVR-520H-S
104
1 2 3 4
1 2 3 4
C
D
F
A
B
E
Table 1: Key operations in General Setting mode
(effective only during recording/playback stop)
∗
R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
Key Operation Setting (
∗
: Default) Remarks
INPUT SELECT,
C/–
(
∗
R)
Switches inputs or channels. – –
[SIDE A], [SIDE B] Sets Sync AGC.
[SPEED +], [SPEED -] HD Err Det
ON (
∗
) / OFF –
[Rev SCAN],
[SCAN Fwd]
Sets V-Sync Det. Normal (
∗
) /Short/Long –
[Rev STILL STEP],
[STILL STEP Fwd]
Sets Std Det. Normal (
∗
) /Non STD
Normal (
∗
) /Fast/Stop
–
–
–
–
[Rev
×
3], [
×
3 Fwd]
Sets Threshold level.
(
∗
) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
–
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
Sets Threshold level.
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
–
• Normal:
The value is fixed, with no display of
the value.
–
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
CLEAR
Initializes the setting of General
Setting mode.
–
Pressing the key resets all settings
of General Setting mode to the
initial values. Settings of Specific
Channel Setting mode are not
affected (they are retained).
ESC
Exits AVIO setting for specific areas,
clearing the OSD.
– –
[Display in General Setting mode when the channel currently displayed has specific settings]
∗
1 : In General Setting mode, if the channel displayed has specific settings, the following will be displayed.
AVIO Specific Area Mode Ver*.**
Input - [tuner ]
Sync AGC : ON *
Threshold : Normal *
V-Sync Det : Normal *
Std Det : Normal *
HD Err Det : Normal *
This channel is set up
individually.