DVR-220-S
74
1
2
3
4
1
2
3
4
C
D
F
A
B
E
• Subscreen 1: Command log (ALL) of ATA/ATAPI DEBUG OSD
Subscreen 1 of the second screen is displayed when the ESC, DISP, then "2" keys are pressed, in that order.
Note:
Each time the DIG/ANA key is pressed, the display changes cyclically among subscreens 1 to 4.
The cumulative power-on time and error log that are administered by the writer are displayed. Such information is obtained when the power
is turned on. Thereafter, each time the SEARCH key on the remote control unit for service is pressed while subscreen 3 is displayed, the
updating command is sent, and the data on the subscreen are updated. Care must be taken when updating this subscreen, because an
undesired command is inserted if it is executed while recording, etc.
A T A / A T A P I History - ALL
3 2 0 1 0 0 0 0 0 0 0 0 0 0 A 0 0 0
OK
3 2 2 A 0 0 0 0 0 D E B B 0 0 0 0 6 3 0 0 0
OK
3 2 2 A 0 0 0 0 0 D F 1 E 0 0 0 0 6 3 0 0 0
OK
3 2 2 A 0 0 0 0 0 D F 8 1 0 0 0 0 6 3 0 0 0
OK
3 2 2 A 0 0 0 0 0 D F E 4 0 0 0 0 6 2 0 0 0
OK
3 2 2 A 0 0 0 0 0 E 0 4 6 0 0 0 0 6 3 0 0 0
OK
3 2 2 A 0 0 0 0 0 E 0 A 9 0 0 0 0 6 3 0 0 0
OK
3 2 2 A 0 0 0 0 0 E 1 0 C 0 0 0 0 6 3 0 0 0
OK
> 3 2 2 A 0 0 0 0 0 E 1 6 F 0 0 0 0 6 2 0 0 0 2 3 A 0 0
• Subscreen 3: Writer mentenance information of ATA/ATAPI DEBUG OSD
A T A / A T A P I Writer MaintenanceInfo
Power ON
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 1 0 2 : 5 6
0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
D V D
0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R 0 0 5 3 : 4 8
0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W 0 0 2 2 : 1 6
0 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
C D
0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
R 0 0 3 4 : 0 4
0 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
W 0 0 0 0 : 0 0
0 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0- 0 0
• Subscreen 2: Command log (ERROR) of ATA/ATAPI DEBUG OSD
Error log for the Writer
1
2
3
4
5
1
Power-on time/cumulative power-on time
2
Duration of emission of the laser diode (LD) for DVD-R/DVD while reading
3
Duration of emission of the LD for DVD-W/DVD while writing
4
Duration of emission of the LD for CD-R/CD while reading
5
Duration of emission of the LD for CD-W/CD while writing
4. Second screen (ATA/ATAPI debug screen)
(Not for Service)
(Not for Service)
(Not for Service)
R7R Drive Assy (Read + Write total time)
DVD : 4700h
CD
: 11000h
MTTF time of each LD
(as the guideline of life span of each LD)
(Reference)
