Recording
05
43
En
also
Deleting a timer program
on
page 44.
2
Select ‘New Input’ to set a new timer
program, then press ENTER.
3
Enter the timer recording settings.
Use the
/
buttons to select a field; use
the
/
buttons to change the value.
•
CH
– Choose a channel (2 to 69 for
antenna channels; 1 to 125 for cable,
excluding skip channels), or one of the
external inputs from which to record.
•
Date
– Choose a date up to one month in
advance, or select a daily or weekly
program.
•
Start
– Set the recording start time.
•
Stop
– Set the recording end time
(maximum length of a timer recording is
24 hours).
•
Extend
– Extend the end time of the
timer recording (select
Off
,
30
,
60
,
90
or
120
mins).
4
If you want to change the recording
mode, recording destination, etc., select
‘Set Detailed’.
In this area you can set:
Record to
– Select
HDD
for hard disk
recording or
DVD
for DVD recording. Select
HDD
for Auto Replace Recording (daily or
weekly timer recording only).
Recording Mode
– Select
XP
,
SP
,
LP
,
EP
,
SLP
or
SEP
, (See
Setting the picture quality/
recording time
on page 37). If Manual
Recording is on, then you can also select the
LPCM
setting, or
MN
(press
ENTER
then use
the
/
buttons to select the level).
Auto Replace Rec.
– automatically erases
the previous daily or weekly recording when
the next one is recorded.
Genre
– Select a record genre (for HDD
recording only).
Dual Mono Recording
– Select which
channel of a dual mono broadcast to record
(necessary if recording to a Video mode
DVD).
HDD Recording Format
– Select
Video
Mode On
or
Video Mode Off
depending on
whether you need high-speed copying to
Video mode DVD capability or not.
5
After entering all the timer recording
information, highlight ‘Store Program’
and press ENTER.
The timer recording list screen is displayed
again. The timer program you just input
appears in the list. The rightmost column
shows various timer recording status
messages:
•
OK
– Can be recorded.
•
Time Over
– Not enough space on the
HDD (the recording won’t finish).
•
Over 12h
– Recording time of over 12
hours set (when recording to the HDD
the recording will be split into two titles).
•
Overlap
– Two timer programs partially
or completely overlap. The one starting
earlier will take priority.
•
Until
... (e.g.,
Until 8/13
) – For a regular
recording, the last program that could
be recorded is shown.
•
Data Over
–Can’t record because the
disc management area of the disc is full.
Timer Program Set
Manhattan Open Tennis
CH
Date
Start
Stop
Extend
10ch
EVERYDAY
6:00PM
7:00PM
30 min
Enter Details
Detailed Settings
Record To
HDD
Recording Mode
XP
Auto Replace Rec.
On
Genre
No Category
Dual Mono Recording
L
HDD Recording Format
Video Mode On
Store Program
Cancel
Set Title Name
Set Detailed
DVR640H_KU_EN.book 43 ページ ２００６年３月７日 火曜日 午後３時１８分
