Pioneer DVJ-X1 - Professional DVD Turntable, Service Manual

Page: 117 / 136

DVJ-X1
117
5 6 7 8
5 6
7
8
C
D
F
A
B
E
1
Do NOT warp the sheet SW.
2
No dirt or foreign object must be attached to the adhering
surface of jog holder 2. If glue remains on the adhering
surface, remove it completely using alcohol.
3
When gluing on a new sheet SW, properly position it so that
it will not ride on the rib of jog holder 2.
4
Evenly adhere the whole gluing face of the sheet SW,
including the contact, to jog holder 2, taking care that there
are no air bubbles in the glue. If there are air bubbles,
leaving dry spots on the sheet SW, replace the sheet SW
with a new one. Do NOT reuse the sheet SW.
5
Adhere the SW Cushion HH48/2 to their appointed positions.
6
Before plugging the flexible cable back into the connector of
the sheet SW, be sure to release the lock of the connector
of the JFLB Assy then lock it again after reconnection.
5
SW cushion HH48/2
×
18
Sheet SW
Jog holder 2
Notes for replacing the sheet SW
3
1
Remove the earth plate by removing the four screws.
2
Remove the mechanism holder plate by removing the four
screws.
3
Remove the six screws and one flexible cable.
4
Remove the player section.
Player Section
3
Earth plate
Mechanism holder plate
Earth spring
A earth spring is attached between the mechanism holder
plate and the slot-in mechanism section. Be sure not to lose it.
1
1
1
1
1
As the earth plate for grounding is hooked to the front plate,
be careful not to bump it against the front plate when removing i
it.
4
3
3
3
2
2
2
3
3
3
3
2