Pioneer DVH-P5000UB, Operation Manual

Page: 77 / 96

#
When you select OFF in TA , you cannot select
FRONT-L .
#
If a position other than FRONT-L or FRONT-R
is selected, CHECK POSITION is displayed. To set
the position, refer to Using the position selector
on page 68.
2 Push MULTI-CONTROL left or right to
select the speaker to be adjusted.
FRONT-L
(front speaker left)
—
CENTER (center
speaker)
—
FRONT-R (front speaker right)
—
REAR-R (rear speaker right)
—
REAR-L (rear
speaker left)
—
SUB WOOFER (subwoofer)
#
You cannot select speakers whose size is set
at OFF . (Refer to Setting the speaker setting on
page 73.)
3 Push MULTI-CONTROL up or down to
adjust the distance between the selected
speaker and the listening position.
0.0
to
500.0
is displayed as the distance is in-
creased or decreased.
4 Press BAND to return to the ordinary
display.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’
s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL Vocal
FLAT Flat
Display Equalizer curve
CUSTOM 1
Custom 1
CUSTOM 2 Custom 2
SUPER BASS Super bass
!
CUSTOM 1
and
CUSTOM 2
are adjusted
equalizer curves.
!
When
FLAT
is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.
%
Press EQ to select the equalizer.
Press
EQ
repeatedly to switch between the fol-
lowing equalizers:
POWERFUL
—
NATURAL
—
VOCAL
—
FLAT
—
CUSTOM 1
—
CUSTOM 2
—
SUPER BASS
Adjusting 3-band parametric
equalizer
For CUSTOM 1 and CUSTOM 2 equalizer
curves, you can adjust the front, rear and cen-
ter equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.
!
A separate
CUSTOM 1
curve can be cre-
ated for each source.
!
A CUSTOM 2 curve can be created com-
mon to all sources.
!
The center speaker largely determines the
sound image and getting the balance right
isn
’
t easy. We recommend reproducing a 2-
ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-
justing the center speaker output to the
balance you have already got among the
other speakers.
Available accessories
En
77
Section
03
A
vailable
accessories