Initial Settings
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Function display
Shows the function status.
1
Press SOURCE and hold until the unit
turns off.
2
Press FUNCTION and hold until function
name appears in the display.
3
Press FUNCTION to select one of the in-
itial settings.
Press
FUNCTION
to select one of the initial
settings.
CLOCK AJST
(clock)
—
FM STP
(FM tuning
step)
—
AM STP
(AM tuning step)
—
WARN
(warning tone)
—
AUX1
(auxiliary input1)
—
AUX2
(auxiliary input2)
—
V.IN
(AV input set-
ting)
—
R-SP
(rear output and subwoofer con-
troller)
—
E-SCRL
(ever scroll)
#
To cancel initial settings, press
BAND
.
#
You can also cancel initial settings by holding
down
FUNCTION
until the unit turns off.
Setting the clock
Use these instructions to set the clock.
1
Press FUNCTION to select CLOCK AJST.
2
Press
c
or
d
to select the segment you
wish to set.
Hour
—
Minute
As you select segments of the clock display,
the selected segment blinks.
3
Press
a
or
b
to set the clock.
Pressing
a
will increase the value of the se-
lected segment. Pressing
b
will decrease the
value of the selected segment.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
1
Press FUNCTION to select FM STP.
2
Press
c
or
d
to select the FM tuning
step.
Press
c
to select
50
(50 kHz). Press
d
to se-
lect
100
(100 kHz).
Note
If seek tuning is performed in 50 kHz steps, sta-
tions may be tuned in imprecisely. Tune in the sta-
tions with manual tuning or use seek tuning
again.
Setting the AM tuning step
The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
kHz to 1 602 kHz allowable) to 10 kHz (530 kHz
to 1 640 kHz allowable).
1
Press FUNCTION to select AM STP.
2
Press
c
or
d
to select the AM tuning
step.
Press
c
to select
9
(9 kHz). Press
d
to select
10
(10 kHz).
Switching the warning tone
If the front panel is not detached from the
head unit within five seconds of turning off the
ignition, a warning tone will sound. You can
turn off the warning tone.
1
Press FUNCTION to select WARN.
2
Press
a
or
b
to turn WARN on or off.
Operating this unit
En
45
Section
03
Operating
this
unit
