#
Fast forward/fast reverse may not be possible
at certain locations on some discs. If this hap-
pens, normal playback automatically resumes.
3
To skip back or forward to another
track, press
o
or
p
.
Pressing
p
skips to the start of the next
track. Pressing
o
once skips to the start of
the current track. Pressing again will skip to
the previous track.
Track numbers are displayed for eight sec-
onds.
#
Using
NUMBER
also performs the same op-
eration. For more details, refer to
Specifying track
on this page.
4
To stop playback, press
g
.
#
When you stop Video CD playback by pressing
g
, that location on the disc is memorized en-
abling playback from that point when you play
the disc again.
#
To resume playback, press
f
.
#
If the remote control is set to
DVH
,
g
does
not operate.
Specifying track
To perform this function, set the remote con-
trol to
DVD
mode.
!
You cannot operate this function by using
NUMBER
when the remote control is set to
DVH
mode.
%
Press NUMBER corresponding to a de-
sired track.
Track number is displayed for eight seconds
and playback starts from the selected track.
!
To select 3, press
3
.
!
To select 10, press
10
and
0
in that order.
!
To select 23, press
10
,
10
and
3
in that
order.
Notes
!
With some discs, the icon
may be dis-
played and operation may not be possible.
!
With Video CD, direct search is not possible
during PBC playback.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
!
To perform this function, set the remote
control to
DVH
mode.
1
Press DIRECT.
Track number input display appears.
2
Press 0 to 9 to enter the desired track
number.
!
To select 3, press
3
.
!
To select 10, press
1
and
0
in order.
#
You can cancel the input number by pressing
CLEAR
.
3
Press DIRECT.
The track of entered number will play.
Notes
!
After entering the number input mode, if you
do not perform an operation within about
eight seconds, the mode is automatically can-
celed.
!
During playback of Video CDs featuring PBC
(playback control), this function cannot be op-
erated.
Pausing Video CD playback
Pause lets you temporarily stop disc playback.
%
Press
f
during playback.
The icon
e
is displayed and playback is
paused, letting you view a still image.
#
To resume playback at the same point that you
turned pause on, press
f
again.
Note
Depending on the disc and the playback location
on the disc, the icon
may be displayed, indicat-
ing that still playback is not possible.
Operating this unit
En
25
Section
03
Operating
this
unit
