20
03
Section
En
Operating this unit
Aspect Ratio:
4:3: For 4:3 TV picture.
16:9: For 16:9 wide screen TV.
Note
There is no 16:9 specification for VCD; for
VCD the video output only in 4:3 format; in
our setting menu, 4:3 or 16:9 setting is for
video monitor setting, but not mean that
DVD will output video signal in 4:3 or 16:9
format; which means current our TFT is in
16:9, when we play VCD, if we want to keep
the video signal without distortion, the video
should not be set to full screen like 16:9.
Mirror:
When select "Mirror on", the video of
camera is mirror image.
Camera Polarity
Select Camera Polarity Battery, Ground or
Off.
Battery: When the polarity of the connected
lead is positive while the gear shift is in
REVERSE (R) position
Ground: When the polarity of the connected
lead is negative while the gear shift is in
REVERSE (R) position
Off: The camera polarity is disabled.
AV Input
Select Av Input on or off.
AUX
Select auxiliary device on or off.
Demo
Select Demo, press [M.C.] or [ENTER] to
run. "Demo" will be flashed on the top right
corner, then DEMO mode is engaged.
Text Scroll
Select Text Scroll on or off.
Language
Setting on screen display, Subtitle, Audio,
DVD Menu Language.
If the DVD disc has the audio file in the
selected language, the dialogues you
listened to will be in the selected language.
Audio
Loudness:
Turn on or off the loudness.
SubWoofer:
Selecting 80Hz, 120Hz or 160Hz to activate
subwoofer-out.
Selecting subwoofer off to activate rear line-
out.
Sub Volume:
Select subwoofer volume: 0 to 33.
• Sub Volume couldn't be adjusted when
SubWoofer Off is selected.
Radio
LOC DX:
Select radio local or distant.
LOC: Only stations with strong signal can
be received.
DX: Stations with strong and weak signals
can be received.
Stereo / Mono:
Select FM stereo or mono.
FM Step(FM tuning step):
Select FM step 50kHz or 100kHz
seek tuning step
• The tuning step remains at 50kHz during
manual tuning.
AM Step:
Select AM step 9kHz or 10kHz
The AM tuning step can be switched
between 9kHz and 10kHz.
Bluetooth
Bluetooth:
If the Bluetooth is setting is On, then the
BT will be available , otherwise the BT will
never work and in disable status.
Connect:
If the Connect is set to Auto, then BT of
the unit will connect automatically with the
HFP device which is already paired in every
disconnect status (Bluetooth must be "On").
Auto Answer:
If the Auto Answer is set to Auto, then
BT of the unit will answer the in-coming
call automatically when the BT is already
connected with your HFP device( Bluetooth
must be "On"), otherwise you have to
answer the in-coming call by press answer
button of the remote or panel.
