manualshive.com logo in svg

Pioneer DVD-R7783, Service Manual, Page: 2 / 96

Share
Download
Pioneer DVD-R7783 Service Manual Download Page 2

 

DVD-R7783

2

1

2

3

4

1

2

3

4

C

D

F

A

B

E

 

SAFETY INFORMATION

This  service  manual  is  intended  for qualified  service  technicians;  it  is  not  meant  for  the  casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.

WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause
cancer, birth defects or other reproductive harm.

Health & Safety Code Section 25249.6 – Proposition 65

IMPORTANT

The pickup of this device conforms to Class 3A of the FDA Laser Restrictions

(CFR21 PART  1040), and the device, which conforms to Class A as a total

product, is not to be disassembled for repair in the U.S.A. or its territories.

In other districts, the device must be disassembled for repair only by a

specially instructed person with sufficient care against laser light.

VARO!
AVATTAESSA       JA      SUOJALUKITUS
OHITETTAESSA       OLET      ALTTIINA
NÄKYMÄTTÖMÄLLE   LASERSÄTEIYLLE.
ÄLÄ  KATSO   SÄTEESEEN.

ADVARSEL :
USYNLIG  LASERSTRÅLING  VED  ÅBNING
NÅR SIKKERHED SAFBRYDERE ER UDE AF
FUNKTION.   UNDGÅ   UDSÆTTELSE   FOR
STRÅLING.

VARNING!
OSYNLIG  LASERSTRÅLNING  NÄR  DENNA
DEL     ÄR     ÖPPNAD     OCH     SPÄRREN
ÄR URKOPPLAD. BETRAKTA  EJ  STRÅLEN.

WARNING!
DEVICE INCLUDES LASER DIODE WHICH
EMITS INVISIBLE INFRARED RADIATION
WHICH IS DANGEROUS TO EYES. THERE IS
A WARNING SIGN ACCORDING TO PICTURE
1 INSIDE THE DEVICE CLOSE TO THE LASER
DIODE.

                           IMPORTANT
THIS   PIONNER   APPARATUS    CONTAINS
LASER   OF   CLASS  1.
SERVICING OPERATION OF THE APPARATUS
SHOULD   BE   DONE   BY   A   SPECIALLY
INSTRUCTED  PERSON.

LASER
kuva 1
Lasersateilyn
varoitusmerkki

LASER
Picture 1
Warning sign for
laser radiation

          LASER DIODE CHARACTERISTICS
MAXIMUM OUTPUT POWER : 35 mw

WAVELENGTH : 658 nm

Summary of Contents for DVD-R7783

































































































Reviews:

No comments