DV-PT100-S
97
5
6
7
8
5
6
7
8
C
D
F
A
B
E
2-17: CLUTCH ASSY/RING SPRING/CLUTCH
LEVER/CLUTCH GEAR (Refer to Fig. 2-17-A)
1. Remove the Polyslider Washer
1
.
2. Remove the Clutch Assy and Ring Spring.
3. Remove the Clutch Lever.
4. Remove the Coupling Gear, Coupling Spring and Clutch
Gear.
NOTE:
1. In case of the Clutch Assy installation, install it with
inserting the spring of the Clutch Assy into the dent of
the Coupling Gear.
(Refer to Fig. 2-17-B)
2-18: CASSETTE GUIDE POST/INCLINED BASE
S/T UNIT/P4 CAP/LED REFLECTOR
(Refer to Fig. 2-18-A)
1. Remove the P4 Cap.
2. Unlock the support
1
and remove the Cassette Guide
Post.
3. Remove the Inclined Base S/T Unit.
4. Remove the screw
2
.
5. Remove the LED Reflector.
NOTE:
1. Do not touch the roller of Guide Roller.
2. In case of the P4 Cap installation, install it with parallel
for "A" and "B" of Fig. 2-18-B.
3. In case of the Cassette Guide Post installation, install
correctly as the circled section of Fig. 2-18-C.
Fig. 2-17-A
Fig. 2-17-B
Fig. 2-18-A
1
2
1
Clutch Assy
Cassette Guide Post
Cassette Guide Post
Cassette Guide Post
Inclined Base T Unit
Inclined Base S
Unit
LED Reflector
P4 Cap
Cassette Opener
P4 Cap
Clutch Assy
Ring Spring
Clutch Lever
"A"
"B"
Coupling Gear
Coupling Gear
Coupling Spring
Clutch Gear
Fig. 2-18-B
Fig. 2-18-C
Screw Torque: 5
±
0.5kgf•cm
[OK]
[NG]
