101
DV-F727, DV-F07
CONTROL
DIGITAL
OPT.
OUT
VIDEO
R
L
S-VIDEO
COMPONENT
VIDEO OUT
MASTER-SLAVE
CONTROL
CD-DECK
SYNCHRO
Y
P
B
P
R
VIDEO SELECT
OUT
IN
OUT
OUT
SLAVE
MASTER
IN
IN
OUT
IN
OUT
IN
AUDIO
1
VIDEO OUT jack
Connect the VIDEO OUT jack to the video input on a TV or
monitor or to an AV component with video input capability. When
using this jack, be sure to set VIDEO SELECT to the top
position.
2
VIDEO IN jack
Connect the VIDEO IN jack to the video output of another DV-
F727 player or another component with video output capability.
3
S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the
S-VIDEO OUT jack to your TV or monitor using a commercially
available S-video cable. When using this jack, be sure to set
VIDEO SELECT to the top position.
4
S-VIDEO IN jack
Connect the S-VIDEO IN jack to another DV-F727 player or
component with S-video output capability.
5
VIDEO SELECT switch
Use to set which output is used to output the video signals. Set
to the top position for composite video and S-video output and
to the bottom position for component video output.
6
COMPONENT VIDEO OUT jacks
If your TV, projection monitor, projector, or similar component
has component video inputs, you can produce a high quality
picture by connecting to the component video outputs on this
unit. When using these jacks, be sure to set VIDEO SELECT to
the bottom position.
7
AUDIO OUT jacks
Connect to the stereo audio inputs of a TV or stereo AV
component. If you are connecting to an AV component that has
both digital and analog input jacks for DVD player connection, it
may be beneficial to make both connections.
8
AUDIO IN jacks
Connect to the analog audio outputs of another
DV-F727 or component with audio output capability.
9
MASTER-SLAVE CONTROL jacks
Connect two DV-F727 players for singular control of both
players and a total of 601 discs. Connect the MASTER jack on
the player to be used as the “Master” to the SLAVE jack of a
second “Slave” player using the supplied Master-Slave control
cord. Do not attempt to make connections to other components
using this jack.
0
DIGITAL OPT. OUT (optical) jack
Connect the DIGITAL OPT. OUT (optical) to the digital optical
input of an AV component with a
built-in decoder, etc. to output the digital audio signal recorded
on discs.
-
DIGITAL OUT (coaxial) jack
Connect the DIGITAL OUT (coaxial) to the digital coaxial input of
an AV component to output the digital audio signal recorded on
discs.
=
DIGITAL IN (coaxial) jack
Connect the DIGITAL IN (coaxial) jack of another
DV-F727 player or another component with digital output
(coaxial) capability.
~
CONTROL jacks
Use to connect this player to another component bearing the
Pioneer
Î
mark. This lets you control this unit as though it
were a component in a system. Player operations are then
performed by pointing the remote control at the component that
the player is connected to.
!
CD-DECK SYNCHRO jack
If you have a Pioneer cassette deck that has the
CD-Deck synchro function, connect the CD-DECK SYNCHRO
jacks on this unit to the identical jack on the cassette deck
using a commercially available cord with a mini plug (2.5 mm
dia. with no resistance).
INTERFACE CONNECTOR jack
This jack is intended for use by a system commander in the
integration of some systems. Normally, this jack is not used.
Rear Panel
• DV-F727
INTERFACE
CONNECTOR
• DV-F07 ONLY
