28
En
1
Press
STOP
7
(
7
on the front panel).
Playback stops.
2
Press
OPEN/CLOSE
0
(
0
on the front panel).
The disc tray comes out.
3
Remove the disc.
4
Press on the remote control to put the
player in standby.
The disc tray goes back in and the standby indicator
lights.
5
Press
POWER
on the front panel.
The player turns off.
Resuming playback from where
you stopped
–– DVD/Video CD
With this player, it is possible to resume play of a DVD
even when play has been stopped.
Press
STOP
7
once to enable play to resume
from a point shortly before the DVD was stopped
when
PLAY
3
is pressed again.
• Pressing
STOP
7
twice to causes the disc to return to
the beginning when
PLAY
3
is pressed again.
• When
STOP
7
is pressed, “RESUME” appears in the
display for as long as resume playback is possible. If
the function is canceled, “RESUME” disappears and
the disc format appears in the display.
Note
Resume play is only possible when the disc is loaded and
STOP
7
has not be pressed twice in succession (“RESUME”
appears in the display). If you want to continue viewing a DVD at
a later time or date, it is recommended to use the Last Memory
function described on page 55.
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
POWER
STANDBY
0
4
¢
1
¡
7
8
3
2
3
5
1
0
4
¢
1
¡
7
8
3
5
5
5
5
4
¢
1
8
7
e
E
¡
3
2
4
1
