En
Section
01
English
7
<J2M90221A>
Before you start
7
What’s in the box
Remote Control
Audio/ video cable
AA batteries (R6) x 2
Warranty card
Operating instructions (this document)
Loading the batteries in the
remote control
1 Open the back cover.
Press lightly on this part and slide into the
direction of the arrow.
2 Insert the included batteries (two size
AA batteries).
Insert the batteries in the proper direction, as
indicated by the
and
marks inside the
case.
Insert one at a time from the top.
3 Close the back cover.
Close the cover securely (a click should be
heard).
Notes
Do not use any batteries other than the ones
specified. Also, do not use a new battery
together with an old one.
When loading the batteries into the remote
control, set them in the proper direction, as
indicated by the polarity marks (
and
).
Do not heat batteries, disassemble them, or
throw them into flames or water.
Batteries may have different voltages, even if
they are the same size and shape. Do not use
different types of batteries together.
To prevent leakage of battery fluid, remove the
batteries if you do not plan to use the remote
control for a long period of time (1 month or
more). If the fluid should leak, wipe it carefully
off the inside of the case, then insert new
batteries. If a battery should leak and the fluid
should get on your skin, flush it off with large
quantities of water.
When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules that
apply in your country/
area.
WARNING
Do not use or store batteries in direct sunlight
or other excessively hot place, such as
inside a car or near a heater. This can cause
batteries to leak, overheat, explode or catch
fire. It can also reduce the life or performance
of batteries.
