101
DV-38A, DV-S88A, DV-S838A, DV-939A
)
DIMMER (FL) button
Press to change the brightness of the FL display and DVD
indicator in four steps: maximum brightness, medium
brightness, minimum brightness, and off. When the FL display
is turned off, the FL OFF indicator on the front panel lights.
_
JOG MODE indicator
Lights red when the player is in the Jog Mode.
+
JOG MODE (JOG) button
Press to put the player in the Jog Mode. When this mode is on,
rotate MULTI DIAL clockwise to scan frame by frame in the
forword direction and counterclockwise to scan frame by frame
in the reverse direction.
¡
PAUSE
8
button
Press to pause playback of a disc. Press again to resume
playback.
™
REV
1
/FWD
¡
(fast reverse/ fast forward) buttons
During playback of DVD and Video CD, press
FWD
¡
to perform fast forward scanning. Press REV
1
to
perform fast reverse scanning of DVD and Video CD. When a
CD is loaded, audio scanning is performed.
£
SEARCH MODE button
Press to perform a title/group, chapter/track, elapsed time
search or time & frame search.
¢
CLEAR button
Works in conjunction with a number of player functions. Use to
cancel repeat and random playback, and to edit programs.
∞
PROGRAM button
You can program titles, groups, chapters, or tracks to play back
in a desired order. Programs can be a maximum of 24 steps.
Additionally, DVD-Video programs for up to 24 discs can be
stored in the player’s memory for future use.
§
REPEAT button
Press once to repeat playback of current chapter/track. Press
twice to repeat playback of current title/group.
A-B button
Press at the beginning and end of the section you want to
repeat or to mark a location you want to return to.
¶
CONDITION MEMORY button
You can store in memory the settings for up to 15 DVD-Videos.
Press CONDITION MEMORY during DVD-Video playback to
memorize the settings.
•
TV CONTROL buttons (KU/CA Type Only)
FUNC:
Press FUNC to select the TV for remote
control operation.
CHANNEL:Use to select TV channel.
VOLUME: Use to adjust the volume.
ª
TV button (KU/CA Type Only)
Press TV to turn the TV’s power on or put in standby.
Setting up the Remote Control to TV.
1. Input the Manufacturer code.
While holiding down the CLEAR button, input the two digit
code from the table below that corresponds to the make of
your TV.
For example, If you have a Pioneer TV, press and hold
CLEAR, then press 0, 0 on the remote control.
2. Confirm that the TV is responding to the programmed
code.
On the remote, press the
TV button. If the TV swithches
on (or into standby if it was on previously), then you have the
correct code.
If nothing happens when you press the
TV button, start
again from step 1 using a different code.
• Some Manufacturers have several codes. Try each one
until you find the one that works.
18
RCA 5
19
SHARP 1
20
ZENITH 2
21
SANYO 1
22
PANASONIC 2
23
GOLDSTAR 2
24
HITACHI 2
25
HITACHI 3
26
TOSHIBA 2
27
SHARP 2
28
GE 2
29
MAGNAVOX 2
30
TOSHIBA 3
31
HITACHI 4
32
JVC 2
33
FUJITSU
34
PIONEER 2
35
GRANDIENTE
00
PIONEER 1
01
RCA 1
02
SHARP 3
03
ZENITH 1
04
SONY
05
TOSHIBA 1
06
HITACHI 1
07
PHILIPS
08
PANASONIC 1
09
MITSUBISHI
10
GOLDSTAR 1
11
GE 1
12
MAGNAVOX 1
13
JVC 1
14
SANYO 2
15
RCA 2
16
RCA 3
17
RCA 4
Code
Manufacturer
Code
Manufacturer
Preset Code List