Pioneer DV-366-S Service Manual Download Page 52 | Manualshive

Page: 52 / 94

background image

DV-366-S

52

1

2

3

4

1

2

3

4

C

D

F

A

B

E

7. GENERAL INFORMATION

7.1 DIAGNOSIS

7.1.1 TEST MODE

Test Mode Functional Specification

1

Test mode entry

In the power ON state, press the [ESC] (A8-5F) key and [TEST / RANDOM] (A8-5E) key in order of the Test mode remote control
unit.
• Light the all FL and LEDs, and goes out the FL and LEDs when pressing the keys of something.
• OSD displays test mode. Refer to the "7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE".

2

Release the Test mode

• Turn off the power.
• Press the [ESC] (A8-5F) key of the remote control unit and reset it.

3

Tray open / close

• Press the [REPEAT A-B] (A8 - 48) key of the remote control unit.
• Press the [OPEN / CLOSE] key of the main unit from the stop state.

4

Playback stop

1. Press the [REPEAT] (A8 - 44) key of the remote control unit from the playback state.
2. Press the [STOP] key of the remote control unit or main unit from the playback state.
(Playback stops, but the loaded disc keeps rotating.)

5

LD ON

DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n).
CD

: Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n).

6

Focus on / sweep

1. Lock the focus by pressing the [TEST] (A8-5E) and [2] (A8-02) keys in order.
2. Repeat focus sweep by pressing the [TEST] (A8-5E) and [3] (A8-03) keys in order.

7

Spindle FG servo

CAV : Press the [TEST] (A8-5E) and [5] (A8-05) keys in order,then rise up the spindle and FG servo becomes on.
CLV : Press the [TEST] (A8-5E) and [9] (A8-09) keys in order,then rise up the spindle and FG servo becomes on.

8

Tracking open / close

1. Open tracking by pressing the [STEP FWD] (A8-54) key of the remote control unit in the play state.
2. Close tracking by pressing the [STEP REV] (A8-50) key of the remote control unit in the play state.

9

Slider servo on/off

1. Turn on the slider servo by pressing the [TEST] (A8-5E) and [CX] (A8-0E) keys in order.
2. Turn off the slider servo by pressing the [TEST] (A8-5E) and [TV/LDP] (A8-0F) keys in order.

0

Slider in / out

Slider in

: In the tracking off state, press the [SCAN REV] (A8-11) key of the remote control unit.

Slider out : In the tracking off state, press the [SCAN FWD] (A8-10) key of the remote control unit.

-

Play (perform only the ID search and trace to the specified location)

Press the [TV/LDP] (A8-0F) key of the remote control unit from the stop state.
Perform only trace, video and audio outputs are nothing.

=

Screen display ON/OFF

1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit.
2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit.

«
...
50
51
52
53
54
...
»

Summary of Contents for DV-366-S































































































Reviews:

No comments

Related manuals for DV-366-S

MediaLounge DSM-520

Brand: D-Link Pages: 2

Brand: Haier Pages: 17

YP-60V - YEPP Sports 256 MB Digital Player

Brand: Samsung Pages: 36

Brand: Oakley Pages: 1

Brand: Shanling Pages: 16

Brand: GoVideo Pages: 2

Brand: Inovalley Pages: 13

Brand: Grundig Pages: 4

Brand: Mustek Pages: 1

Brand: Rautz Pages: 32

Brand: Hitachi Pages: 48

Brand: Hitachi Pages: 57

Brand: Hitachi Pages: 66

Brand: Hitachi Pages: 74

Brand: Hitachi Pages: 112

Brand: Hitachi Pages: 19

Brand: Kenwood Pages: 20

Brand: Kenwood Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands