MAKING CONNECTIONS
17
En
System Control Connections
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this player’s
CONTROL IN
jack to the
CONTROL OUT
jack of
another PIONEER component bearing the
Î
mark, you
can control the player as though it were a component in
a system (system control).
• If you connect for system control, you cannot operate
the player directly. Point the remote control unit at the
component (AV amplifier, etc.) connected to the
CONTROL OUT
jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier
using an audio or video
cord
, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
TV or monitor
AUDIO
OUT
L
R
VIDEO OUT
DIGITAL OUT
CONTROL
AC IN
IN
AV CONNECTOR
S-VIDEO
OUT
AV CONNECTOR
AV CONNECTOR Connection
Using a commercially available 21-pin SCART cable,
connect the
AV CONNECTOR
jack on the player to a TV
or monitor to achieve audio and video with a single
connection.
• SCART cables are available in a variety of
configurations. Before making connections, be sure to
check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be found
in the
‘Specifications’
(
page 56
).
Pioneer component with
Î
mark.
AUDIO
OUT
L
R
VIDEO OUT
DIGITAL OUT
CONTROL
AC IN
IN
AV CONNECTOR
S-VIDEO
OUT
CONTROL
OUT
CONTROL
IN
Summary of Contents for DV-340
Page 1: ...DV 340 Operating Instructions DVD PLAYER ...
Page 2: ...2 En ...
