Pioneer DV-3310 Service Manual Download Page 59

Page: 59 / 108

DV-533, DV-3310, DV-533K, DV-5310KD

7. GENERAL INFORMATION

7.1 DIAGNOSIS

7.1.1 SELF-DIAGNOSTIC FUNCTION OF PICKUP DEFECTIVE

Character in bold : Item name

: Information display

Test Mode Screen Display

Laser diode current value

Symptom

• Indicates "No Disc" in FL display.
• Player does not playback, etc..

This unit can confirm the laser diode current value (DVD: 650nm, CD: 780nm) of pickup on the Test Mode screen.
(Press the ESC

→

TEST keys in order on the test mode remote control unit (GGF1067) to enter the test mode.)

Note :

When a DVD disc or a CD disc is played in the test mode, this function is effective.

Procedure of Self-Diagnosis

Enter the Test mode.

When diagnosing the 650nm laser diode:
Press the

→

keys in order, and turn on the laser diode (It light-up for nine seconds.).

When diagnosing the 780nm laser diode:
Press the

→

keys in order, and turn on the laser diode (It light-up for nine seconds.).

When let it turn on once again after performed

once,

After pressed REP.B key once
650nm: Press the

→

keys in order

780nm: Press the

→

keys in order

Confirm the indicated value of the laser diode current (LDI). (Refer to following figure.)

When indicated value is more than 100, pickup is defective.

→

Replacement is necessary

Replace the Traverse Mechanism Assy or Pickup.

TEST

It's effective in case of the following condition.

Summary of Contents for DV-3310













































































































Search results

Summary of Contents for DV-3310

Reviews:

Related manuals for DV-3310

Brands by name

Popular brands

Pioneer DV-3310, Service Manual

Search results

Summary of Contents for DV-3310

Reviews:

Related manuals for DV-3310

Brands by name

Popular brands