Pioneer DV-3310 Service Manual Download Page 102

Page: 102 / 108

102

DV-533, DV-3310, DV-533K, DV-5310KD

DTS indicator
Indicates DTS audio playback.

5.1CH indicator (DV-5310KD Only)
Indicates that the 5.1CH mode is selected.

PRGSVE indicator
Lights when unit is set to output 525 line progessive scan (non-
interlaced) video.

indicator

Indicates Multi-Angle playback is in progress.

GUI indicator
Indicates an on-screen menu operation is being performed.

TITLE indicator
Indicates a title number is being displayed.

indicator

Indicates that TruSurround is selected.

TRK indicator
Indicates a track number is being displayed.

CHP indicator
Indicates a chapter number is being displayed.

LAST indicator
Indicates the Last Memory location is recorded in memory for
the currently loaded DVD or Super VCD/Video CD.

COND. indicator
Indicates that Condition Memory settings are memorized for the
currently loaded DVD.

TOTAL indicator
Indicates that the disc in the player is stopped and DISPLAY
has been pressed.

REMAIN indicator
Indicates that the remaining playback time of a title or chapter/
track is being displayed.

D indicator

Indicates Dolby Digital audio playback.

indicators

Indicates when a disc is playing.

indicator

Indicates when a disc is paused.

Counter display
Displays the playback mode, type of disc, title/folder and
chapter/track numbers, playback time, etc.

TRK

PRGSVE

GUI

DTS

CHP

LAST

TITLE

COND.

TOTAL

REMAIN

5.1

Display Window (DV-3310 and DV-5310KD)

DV-5310KD

Summary of Contents for DV-3310













































































































Search results

Summary of Contents for DV-3310

Reviews:

Related manuals for DV-3310

Brands by name

Popular brands

Pioneer DV-3310, Service Manual

Search results

Summary of Contents for DV-3310

Reviews:

Related manuals for DV-3310

Brands by name

Popular brands