En
Section
05
English
31
<J2M90321A>
Changing the Settings (Initial Settings)
31
Options settings
Settings
Component Out
Progressive
Select this when a TV or projector supporting progressive video
signals is connected to the
COMPONENT VIDEO OUT
terminals.
PRGSVE
appears on the front panel display.
Interlace
Select this when a TV or projector that does not support progres-
sive video signals is connected to the
COMPONENT VIDEO OUT
terminals.
When
Progressive
is selected and
ENTER
is pressed, a confirmation message appears. To change the setting,
select
Yes
then press
ENTER
. If you do not want to change the setting, select
No
then press
ENTER
.
The picture may be disturbed when switching between
Progressive
and
Interlace
.
When
HDMI Resolution
is set to
720x480i/720x576i
,
Interlace
is set (DV-420V only).
If the picture no longer appears after changing the setting to
Progressive
, set it back to
Interlace
. For instruc-
tions on how to do so, see
Setting the Component Out and HDMI Resolution settings back to their defaults
on
page 28.
AV Connector Out
Video
Regular video signals (composite) are output.
RGB
Select this when connected to a TV compatible with RGB video
signals. Note, however, that no video signals are output from the
composite video output terminals when set to RGB.
HDMI Resolution
(DV-420V only)
720x480i/
720x576i
720 x 480 pixel (NTSC)/
720 x 576 pixel (PAL) interlaced images are
output.
720x480p/
720x576p
720 x 480 pixel (NTSC)/
720 x 576 pixel (PAL) progressive images
are output.
1280x720p
1 280 x 720 pixel progressive images are output.
1920x1080i
1 920 x 1 080 pixel interlaced images are output.
1920x1080p
1 920 x 1 080 pixel progressive images are output.
When the setting is changed, the picture may be disturbed or some time may be required for it to appear.
When the setting is changed, a confirmation message appears. If the picture is properly displayed, select
Yes
then press
ENTER
. If it is not properly displayed, select
No
then press
ENTER
.
If the picture no longer appears after changing the setting, set it back to
720x480p/
720x576p
. See
Setting the
Component Out and HDMI Resolution settings back to their defaults
on page 28.
HDMI Color
(DV-420V only)
Full range RGB
The colors become denser. Select this if dark colors seem dis-
played in a uniform black.
RGB
The colors become lighter. Select this if the dark colors seem too
light.
Component
Select this when connected to an HDMI-compatible TV. The sig-
nals are sent in color difference (8-bit) format.
The settings can only be changed when the player and HDMI-compatible device are connected using an HDMI
cable.
The factory default settings are indicated in
italic
.
Language
settings
Some discs will not change to the selected language.
On some discs, the language is changed on a menu screen. For such discs, change the
language on the menu screen.
