Getting started
04
26
En
• After I load a DVD disc, it ejects
automatically after a few seconds!
Most likely, the disc is the wrong region
for your player. The region number should
be printed on the disc; check it against
the region number of the player (which
you can find on the rear panel). See also
on page 58.
If the region number is OK, it may be that
the disc is damaged or dirty. Clean the
disc and look for signs of damage. See
also
Taking care of your player and discs
on
page 54.
• Why won’t the disc I loaded play?
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and not damaged. See
Taking care
of your player and discs
on page 54 for
information on cleaning discs.
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM.
See
Disc / content format playback
compatibility
on page 8 for more on disc
compatibility.
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and bottom
of the screen. This is not a malfunction.
• I have a standard (4:3) TV and set the player
to show widescreen DVDs in pan & scan
format, so why do I still get black bars top
and bottom with some discs?
Some discs override the display
preferences of the player, so even if you
have
4:3 (Pan & Scan)
selected, those
discs will still be shown in letter box
format. This is not a malfunction.
• My AV receiver is definitely compatible with
96kHz Linear PCM audio, but it doesn’t
seem to work with this player. What’s
wrong?
For digital copy-protection purposes,
some 96kHz DVD discs are automatically
downsampled to 48kHz. This is not a
malfunction. With these kinds of discs, if
you want to enjoy high-quality analog
audio, set
Digital Out
to
Off
(see
Digital
Out
on page 46), and
96kHz PCM Out
to
96kHz
(see
96kHz PCM Out
on page 47).
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers more playback features in
more detail.
Button
What it does
Starts playback.
DVD and Video CD: If the display
shows
RESUME
or
LAST MEM
playback starts from the resume or
last memory point (see also
Resume and Last Memory
below.)
Pauses a disc that’s playing, or
restarts a paused disc.
DV260.book Page 26 Friday, January 10, 2003 7:13 PM
Summary of Contents for DV-2650
Page 126: ...64 It ...
Page 127: ...65 It ...