Pioneer DV-250 Service Manual Download Page 71

Page: 71 / 99

DV-353-K

Tray

Bonnet and Tray Panel

DIAGNOSIS OF FJMB ASSY

Remove the Bonnet (Screws

Power ON

Tray open (

)

4
5

Tray close (

)

Pull out the Power Cable from the outlet.

Remove the Tray Panel

Tray

Tray Panel

In the reverse state, pass a small screwdriver through a slit and
slide a protruding portion of the Drive Gear of the Loading
Mechanism Assy to the direction of arrow.
If the Tray moved toward the front about 2 or 3 cm, pull out the
Tray by hands.

How to Open the Tray by Manual Operating

Slit

Small Square-bar
Screwdriver

Drive Gear

Loading Mechanism Assy

Protruding
portion

Unclamp the wire.

Disconnect the wiring.

Unhook (

Remove the Front Panel.

Front Panel Assy

Front Panel

DOUT ASSY

DOUT ASSY
: This is not installed to this.

: This is not installed to this.

DOUT ASSY
: This is not installed to this.

7.1.6 DISASSEMBLY

Summary of Contents for DV-250




































































































Search results

Summary of Contents for DV-250

Reviews:

Related manuals for DV-250

Brands by name

Popular brands

Pioneer DV-250, Service Manual

Search results

Summary of Contents for DV-250

Reviews:

Related manuals for DV-250

Brands by name

Popular brands