Pioneer DV-250 Service Manual Download Page 54 | Manualshive

Page: 54 / 99

background image

54

DV-353-K

7. GENERAL INFOMATION

7.1 DIAGNOSIS

7.1.1 TEST MODE

Test Mode Functional Specification

1

Test mode entry

In the power ON state, press the [ESC] (A8-5F) key and [TEST / RANDOM] (A8-5E) key in order of the LD remote control unit.
• Light the all FL and LEDs, and goes out the FL and LEDs when pressing the keys of something.
• OSD displays test mode. Refer to the "Display Specification of the Test Mode".

2

Release the Test mode

• Turn off the power.
• Press the [ESC] (A8-5F) key of the remote control unit and reset it.

3

Tray open / close

• Press the [REPEAT A-B] (A8 - 48) key of the remote control unit.
• Press the [OPEN / CLOSE] key of the main unit from the stop state.

4

Playback stop

• Press the [REPEAT] (A8 - 44) key of the remote control unit from the playback state.
• Press the [STOP] key of the remote control unit or main unit from the playback state.

5

LD ON

DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n).
CD

: Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n).

6

Focus on / sweep

1. Lock the focus by pressing the [TEST] (A8-5E) and [2] (A8-02) keys in order.
2. Repeat focus sweep by pressing the [TEST] (A8-5E) and [3] (A8-03) keys in order.

7

Spindle FG servo

CAV : Press the [TEST] (A8-5E) and [5] (A8-05) keys in order,then rise up the spindle and it becomes FG servo on.
CLV : Press the [TEST] (A8-5E) and [9] (A8-09) keys in order,then rise up the spindle and it becomes FG servo on.

8

Tracking open / close

1. Open tracking by pressing the [STEP FWD] (A8-54) key of the remote control unit in the play state.
2. Close tracking by pressing the [STEP REV] (A8-50) key of the remote control unit in the play state.

9

Slider servo on/off

1. Turn on the slider servo by pressing the [TEST] (A8-5E) and [CX] (A8-0E) keys in order.
2. Turn off the slider servo by pressing the [TEST] (A8-5E) and [TV/LDP] (A8-0F) keys in order.

0

Slider in / out

Slider in

: In the tracking off state, press the [SCAN REV] (A8-11) key of the remote control unit.

Slider out : In the tracking off state, press the [SCAN FWD] (A8-10) key of the remote control unit.

-

Play (perform only the ID search and trace to the specified location)

Press the [TV/LDP] (A8-0F) key of the remote control unit from the stop state.
Perform only trace, video and audio output are nothing.

=

Screen display ON/OFF

1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit.
2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit.

«
...
52
53
54
55
56
...
»

Summary of Contents for DV-250




































































































Reviews:

No comments

Related manuals for DV-250

Brand: Zenith Pages: 50

Brand: Zenith Pages: 24

Brand: ZENEC Pages: 2

Brand: Samsung Pages: 131

Crystalio II VPS-3800

Brand: Pixel Magic Pages: 27

Brand: Intenso Pages: 25

Brand: NextBase Pages: 52

Brand: Coby Pages: 1

Brand: Bang & Olufsen Pages: 12

Brand: X-Micro Pages: 301

Brand: Mach Pages: 16

Brand: Grundig Pages: 24

Brand: Palsonic Pages: 8

Brand: Coby Pages: 1

Brand: Nextar Pages: 38

Brand: NAD Pages: 8

Brand: NAD Pages: 26

Brand: Curtis Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands