En
English
5
<J2M10501A>
5
Before you start
What’s in the box
Remote Control
Audio/
video cable
Power cable (Central American, South American
and Taiwanese model x2)
AA batteries (R6) x 2
Operating instructions (this document)
Front panel button names sticker (Taiwanese model
only) – Chinese language button names for the front
panel controls.
Remote control overlay (Taiwanese model only) –
Place the overlay on the remote control to be able to
read the buttons in Chinese
Loading the batteries in the
remote control
Open the rear lid and insert the batteries
as shown on the diagram below.
To close the rear lid, line up the catch with the groove and slide
in the direction of the arrow (
).
Notes
Do not use any batteries other than the ones
specified. Also, do not use a new battery together with
an old one.
When loading the batteries into the remote control,
set them in the proper direction, as indicated by the
polarity marks (
and
).
Do not heat batteries, disassemble them, or throw
them into flames or water.
Batteries may have different voltages, even if they are
the same size and shape. Do not use different types of
batteries together.
To prevent leakage of battery fluid, remove the
batteries if you do not plan to use the remote control
for a long period of time (1 month or more). If the fluid
should leak, wipe it carefully off the inside of the case,
then insert new batteries. If a battery should leak and
the fluid should get on your skin, flush it off with large
quantities of water.
When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/
area.
WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near
a heater. This can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the life or
performance of batteries.
