Pioneer DJM-800 Service Manual Download Page 125

Page: 125 / 176

DJM-800

125

M 1.000
D 1.000

How to start the Test Mode.

There are 11 modes in this Test Mode.
If the TAP button is pressed, Mode1 ~ 11 can be selected by selector switch.

When set up mode is started, Mode 1 is selected automatically.

Once Test Mode starts, it keeps the test mode until turning the Power off.

Test mode Contents.

Mode 1 : Confirmation of software version.

Mode that confirms version of microcomputer, DSP (program), DSP (data), and FPGA.

It is displayed a version of firmware by FL display.

For exsample
Microcomputer : 1.000
DSP (program) : 1.000

Mode 2 : ALL LED & FL display "OFF" MODE. "ALL CLR"

It displays "ALL CLR" on the FL display in the first 2 seconds.

It displays "ALL SET" on the FL display in the first 2 seconds.

To enter test mode, turn the Power button while pressing all of the HARMONIC,
FADER START CH1,CUE CH1 buttons.

Mode 3 :

ALL LED & FL display "ON" MODE. "ALL SET"

Summary of Contents for DJM-800

















































































































































































Search results

Summary of Contents for DJM-800

Reviews:

Related manuals for DJM-800

Brands by name

Popular brands

Pioneer DJM-800, Service Manual

Search results

Summary of Contents for DJM-800

Reviews:

Related manuals for DJM-800

Brands by name

Popular brands