Initial Settings
En
15
Correcting distorted sound
You can minimize distortion likely caused by the
equalizer curve settings.
• Setting an equalizer level high can cause
distortion. If high sound crippled or distorted,
try switching to
Low
. Normally, leave the setting
at
High
to ensure quality sound.
1 Press SOURCE and hold until this unit
turns off.
2 Press FUNCTION and hold until a function
name appears in the display.
3 Press FUNCTION to select D.ATT.
Press
FUNCTION
until
D.ATT
appears in the
display.
4 Press
2
or
3
to select Low or High.
Pressing
2
or
3
switches between
Low
(low)
and
High
(high) and that status is displayed.
• To cancel initial settings, press
BAND/ESC
.
• You can also cancel initial settings by holding
down
FUNCTION
until the unit turns off.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
03
Section
