background image

20

En

ERROR-23

USB device was not formatted properly.
– Format the USB device with FAT12, 

FAT16 or FAT32.

ERROR-16

The iPod firmware version is old.
– Update  the  iPod  version.

iPod failure.
– Disconnect the cable from the iPod. 

Once the iPod’s main menu is 
displayed, reconnect the iPod and 
reset it.

STOP

There are no songs in the current list.
– Select a list that contains songs.

NOT FOUND

No related songs.
– Transfer songs to the iPod.

Bluetooth device

ERROR-10

The power failed for the Bluetooth 
module of the unit.
– Turn the ignition switch OFF and back 

to ACC or ON.

Apps

NO BT DEVICE GO TO BT MENU TO 
REGISTER

No Bluetooth device found.
– Connect the unit and the device via 

Bluetooth (page 9).

CONN. FAILED PRESS BAND KEY TO 
RETRY

Bluetooth connection failed.
– Press 

BAND

/

 to make a connection 

again.

DISCONNECTED PRESS BAND KEY TO 
RETRY

Bluetooth connection failed.

– Press 

BAND

/

 to make a connection 

again.

CHECK APP

Connection to the application failed.
– Follow the instructions that appear on 

the screen.

START UP APP

The application has not started running 
yet.
– Operate the mobile device to start up 

the application.

Discs and player

Use only discs that feature either of the 
following two logos.

Use 12-cm discs.

Use only conventional, fully circular discs.

The following types of discs cannot be 
used with this unit:
– DualDiscs
– 8-cm discs: Attempts to use such discs 

with an adaptor may cause the unit to 
malfunction.

– Oddly shaped discs
– Discs  other  than  CDs
– Damaged discs, including discs that are 

cracked, chipped or warped

– CD-R/RW discs that have not been 

finalized

Do not write on or apply chemicals to the 
surface of the discs.

To clean a CD, wipe the disc with a soft 
cloth outward from the center.

Condensation may temporarily impair 
the player's performance. Let it rest for 
about one hour to adjust to a warmer 

Handling guidelines

temperature. Also, wipe any damp discs 
off with a soft cloth.

When using discs that can be printed on 
label surfaces, check the instructions and 
the warnings of the discs. Depending on 
the discs, inserting and ejecting may not 
be possible. Using such discs may result 
in damage to this equipment.

Do not attach commercially available 
labels or other materials to the discs.
– The discs may warp making the disc 

unplayable.

– The labels may come off during 

playback and prevent ejection of the 
discs, which may result in damage to 
the equipment.

USB storage device

Connections via USB hubs are not 
supported.

Firmly secure the USB storage device 
before driving. Do not let the USB storage 
device fall onto the floor, where it may 
become jammed under the brake or 
accelerator pedal.

Depending on the USB storage device, 
the following problems may occur.
– Operations  may  vary.
– The  storage  device  may  not  be 

recognized.

– Files may not be played back properly.
– The device may cause audible 

interference when you are listening to 
the radio.

iPod

Do not leave the iPod in places with high 
temperatures.

Firmly secure the iPod when driving. Do 
not let the iPod fall onto the floor, where 
it may become jammed under the brake 
or accelerator pedal.

The settings of the iPod such as the 
equalizer and repeat play are changed 
automatically when the iPod is 
connected to the unit. Once the iPod is 

disconnected, those settings will return 
to the original settings.

Incompatible text saved on the iPod will 
not be displayed by the unit.

Only the first 32 characters can be 
displayed as a file name (including the file 
extension) or a folder name.

The unit may not work properly 
depending on the application used to 
encode WMA files.

There may be a slight delay at the start of 
the playback of audio files embedded 
with image data, or audio files stored on a 
USB device with numerous folder 
hierarchies.

 CAUTION

Pioneer cannot guarantee compatibility 
with all USB mass storage devices, and 
assumes no responsibility for any loss of 
data on media players, smartphones, or 
other devices while using this product.

Do not leave discs or a USB storage 
device in any place that is subject to high 
temperatures.

WMA files

Compressed audio 
compatibility

File extension

.wma

Bit rate

48 kbps to 320 kbps 
(CBR), 48 kbps to 384 
kbps (VBR)

Sampling frequency

32 kHz, 44.1 kHz, 48 
kHz

Windows Media™ 
Audio Professional, 
Lossless, Voice/DRM 
Stream/Stream with 
video

Not compatible

Summary of Contents for DEH-X4790BT

























Reviews: