Pioneer DEH-X1650UB, Owner'S Manual

Page: 7 / 48

Black plate (7,1)
This unit is equipped with a subwoofer output
which can be turned on or off.
1
Press M.C. to select the desired setting.
NOR (normal phase)
—
REV (reverse phase)
—
OFF (subwoofer off)
SUB.W CTRL (subwoofer adjustment)
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
1
Press M.C. to display the setting mode.
2
Press
M.C.
to cycle between the following:
Cut-off frequency
—
Output level
—
Slope level
Rates that can be adjusted will flash.
3
Turn M.C. to select the desired setting.
Cut-off frequency:
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Output level:
–
24 to +6
Slope level:
–
12
— –
24
BASS BOOST (bass boost)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select a desired level.
0
to
+6
is displayed as the level is increased or
decreased.
HPF SETTING
(high pass filter adjustment)
Use this function when wanting to listen only to
high-frequency sounds. Only frequencies higher
than the high-pass filter (HPF) cutoff are output
from the speakers.
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between the following:
Cut-off frequency
—
Slope level
3
Turn M.C. to select the desired setting.
Cut-off frequency: OFF
—
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Slope level:
–
12
— –
24
SLA
(source level adjustment)
This function prevents the volume from changing
too dramatically when the source switches.
!
Settings are based on the FM volume level,
which remains unchanged.
!
The AM volume level can also be adjusted with
this function.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to adjust the source volume.
Adjustment range: +4 to
–
4
System menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to select the system menu
function.
Once selected, the following system menu func-
tions can be adjusted.
CLOCK SET
(setting the clock)
1
Press M.C. to display the setting mode.
2
Press M.C. to select the segment of the clock
display you wish to set.
Hour
—
Minute
3
Turn M.C. to adjust the clock.
12H/24H
(time notation)
1
Press M.C. to select the desired setting.
12H (12-hour clock)
—
24H (24-hour clock)
AUTO PI (auto PI seek)
The unit can automatically search for a different
station with the same programming, even during
preset recall.
1
Press M.C. to turn Auto PI seek on or off.
AUX (auxiliary input)
Activate this setting when using an auxiliary de-
vice connected to this unit.
1
Press M.C. to turn AUX on or off.
DIMMER (dimmer)
1
Press M.C. to turn the dimmer on or off.
!
You can also change the dimmer setting by
pressing and holding
/
DIMMER
.
About MIXTRAX
MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
to experience your music as a nonstop mix com-
plete with visual effects.
Notes
!
Depending on the file/song, sound effects
may not be available.
!
Turn MIXTRAX off if the visual effects it pro-
duces have adverse effects on driving. Refer
to
Operations using the MIXTRAX button on
page 5.
MIXTRAX menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
MIXTRAX is on.
SHORT MODE
(short playback mode)
You can select the length of the playback time.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute)
—
1.5 MIN (1.5 minutes)
—
2.0 MIN (2.0 minutes)
—
2.5 MIN (2.5 minutes)
—
3.0 MIN (3.0 minutes)
—
OFF (off)
MIX PATTERN (mix pattern)
The MIXTRAX special effects display changes with
changes in the audio level.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
!
SOUND LEVEL
–
The mix pattern changes
according to the sound level.
!
LOW PASS
–
The mix pattern changes ac-
cording to the bass level.
!
RANDOM
–
The mix pattern changes ran-
domly according to the sound level mode
and low pass mode.
DISP FX (display effect)
The MIXTRAX special effects display can be turned
on or off.
1
Press M.C. to select the desired setting.
ON (MIXTRAX special effects display)
—
OFF
(normal display)
CUT IN FX (manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1
Press M.C. to select the desired setting.
ON
(on)
—
OFF
(off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. to display the main menu.
English
Using this unit
7
Section
Using this unit
En
02
<QRD3206-A>7