Listening to the radio
4
4
4
4
3
3
3
3
5
5
5
5
2
2
2
2
1
1
1
6
6
6
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This unit
’
s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 23).
1
Stereo (
5
) indicator
Shows when the selected frequency is
being broadcast in stereo.
2
LOC indicator
Shows when local seek tuning is on.
3
Band indicator
Shows which band the radio is tuned to,
MW/LW or FM.
4
Preset number indicator
Shows which preset has been selected.
5
Frequency indicator
Shows the frequency to which the tuner is
tuned.
6
Signal level indicator
Shows the radio wave strength.
1
Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2
Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
FM-1
,
FM-2
,
FM-3
for FM or
MW/LW
.
3
To perform manual tuning, push
MULTI-CONTROL left or right.
The frequencies move up or down step by
step.
4
To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
If you push and hold
MULTI-CONTROL
left or
right you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL
.
Tuner
En
19
English
Section
04
Summary of Contents for DEH-P9800BT - Radio / CD
Page 2: ...En 2 ...
