Playing a CD
1
2
3
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CDwith your multi-CDplayer. More advanced
CDoperation is explained starting on the next
page.
1
Disc number indicator
Shows the disc currently playing.
2
Track number indicator
Shows the track currently playing.
3
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the multi-CD
player.
Press
SOURCE
until you see
Multi-CD
dis-
played.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 Select a disc you want to listen to with
the 1
6 buttons.
For discs located at 1 to 6, press the corre-
sponding button number.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers,
such as
1
for disc 7, until the disc number ap-
pears in the display.
#
You can also sequentially select a disc by
pressing
a
/
b
.
4 To perform fast forward or reverse,
press and hold
c
or
d
.
5 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!
When the multi-CDplayer performs the pre-
paratory operations,
Ready
is displayed.
!
If the multi-CDplayer does not operate prop-
erly, an error message such as
ERROR-11
may be displayed. Refer to the multi-CDplayer
owner
s manual.
!
If there are no discs in the multi-CDplayer ma-
gazine,
No disc
is displayed.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
#
You can cancel the input number by pressing
CLEAR
.
3 Press DIRECT.
The track of entered number will play.
Multi-CD Player
En
36
Section
08
