Listening to the radio
6
6
6
1
1
1
1 2
2
2
2
3
3
3
3
5
5
5
5
4
4
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This unit
’
s AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 21).
1
Band indicator
Shows which band the radio is tuned to,
MW/LW or FM.
2
5
(stereo) indicator
Appears when the selected frequency is
being broadcast in stereo.
3
Preset number indicator
Shows which preset has been selected.
4
LOC indicator
Appears when local seek tuning is on.
5
Signal level indicator
Shows the radio wave strength.
6
Frequency indicator
Shows the frequency to which the tuner is
tuned.
1
Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2
Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
FM-1
,
FM-2
,
FM-3
for FM or
MW/LW
.
3
To perform manual tuning, push
MULTI-CONTROL left or right.
The frequencies move up or down step by
step.
4
To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
If you push and hold
MULTI-CONTROL
left or
right, you can skip stations. Seek tuning starts as
soon as you release
MULTI-CONTROL
.
Tuner
En
16
Section
04