Black plate (8,1)
Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
!
Prior to using this unit for the first time
after installation
!
If the unit fails to operate properly
!
When strange or incorrect messages ap-
pear on the display
%
Press RESET with a pen tip or other
pointed instrument.
RESET
button
Clearing all memory
To protect personal and private information,
data about the phone stored in this unit can
be deleted.
1
Press SOURCE and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
Language select appears in the display.
3
Turn MULTI-CONTROL to select
Phone reset.
Phone reset
appears in the display.
4
Push MULTI-CONTROL right to show a
confirmation display.
Clear memory YES
is displayed. Clearing
memory is now on standby.
#
If you do not want to reset phone memory,
press
BAND
.
5
Press MULTI-CONTROL to clear the
memory.
All data in the telephone source, including
Phone Book entries, number presets and the
Call History is cleared.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the provided protective
case to prevent theft.
!
If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound and
the front panel will open.
!
You can turn off the warning tone. See
Switching the warning tone
on page 78.
!
You can turn off the face auto open. See
Switching the face auto open
on page 78.
Important
!
Never use force or grip the display and the
buttons too tightly when removing or attach-
ing.
!
Avoid subjecting the front panel to excessive
shocks.
!
Keep the front panel out of direct sunlight and
high temperatures.
!
A few seconds after turning the ignition
switch to on or off, the front panel automati-
cally moves. When this happens, your fingers
may become jammed in the panel, so keep
your hands away from it.
<CRD4060-A/N>8
Before You Start
En
8
Section
01
