Pioneer DEH-P6900IB/XN/EW5 Service Manual Download Page 3

Page: 3 / 72

DEH-P6900IB/XN/EW5

Service Precaution

1. You should conform to the regulations governing

the product (safety, radio and noise, and other

regulations), and should keep the safety during

servicing by following the safety instructions

described in this manual.

2. Before disassembling the unit, be sure to turn off

the power. Unplugging and plugging the connectors

during power-on mode may damage the ICs inside

the

unit.

3. To protect the pickup unit from electrostatic discharge

during servicing, take an appropriate treatment

(shorting-solder) by referring to "the DISASSEMBLY".

4. After replacing the pickup unit, be sure to check the
grating.
5. Be careful in handling ICs. Some ICs such as MOS

type are so fragile that they can be damaged by

electrostatic

induction.

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.

Summary of Contents for DEH-P6900IB/XN/EW5









































































Search results

Summary of Contents for DEH-P6900IB/XN/EW5

Reviews:

Related manuals for DEH-P6900IB/XN/EW5

Brands by name

Popular brands

Pioneer DEH-P6900IB/XN/EW5, Service Manual

Search results

Summary of Contents for DEH-P6900IB/XN/EW5

Reviews:

Related manuals for DEH-P6900IB/XN/EW5

Brands by name

Popular brands