06
Section
Audio Adjustments
En
31
English
Español
Deutsch
F
rançais
Italiano
Nederlands
Adjusting subwoofer settings
When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press
AUDIO
to select the
Sub-W2
.
When the subwoofer output is on, you can
select the
Sub-W2
. Press
AUDIO
until
Sub-W2 80
(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as
50
(Hz) or
125
(Hz).
2 Press
2
or
3
to select cut-off frequency.
Press
2
and
50
(Hz) is displayed. Press
3
and
125
(Hz) is displayed. Only frequencies lower
than those in the selected range are output
from the subwoofer.
3 Press
5
or
∞
to adjust the output level of
the subwoofer.
Each press of
5
or
∞
increases or decreases
the level of the subwoofer (e.g.,
+6
to
–6
).
Press
5
or
∞
until you see the desired value
displayed.
Adjusting source levels
SLA (Source level adjustment) lets you adjust
the volume level of each source to prevent radi-
cal changes in volume when switching between
sources.
• Settings are based on the volume level of the
FM tuner, which remains unchanged.
1 Compare the FM tuner volume level with
the level of the source you wish to adjust (e.g.,
built-in CD player).
2 Press
AUDIO
to select
SLA
.
Press
AUDIO
until
SLA
appears in the display.
3 Press
5
or
∞
to adjust the source volume.
Each press of
5
or
∞
increases or decreases
the source volume.
•
SLA +4
–
SLA –4
is displayed as the source
volume is increased or decreased.
Notes
• Since the FM tuner volume is the control, it is
not possible to apply source level adjustments
to the FM tuner.
• The AM tuner volume level can also be
adjusted with source level adjustments.
• The built-in CD and the multi-CD players are
both set to the same source level adjustment
volume automatically.
• External unit 1 and External unit 2 are set to
the same volume adjustment setting automat-
ically.
