Pioneer DEH-P5950IB/XN/ES Service Manual Download Page 2 | Manualshive

Page: 2 / 74

background image

DEH-P5950IB/XN/ES

2

1

2

3

4

1

2

3

4

C

D

F

A

B

E

SAFETY INFORMATION

CAUTION

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.

WARNING

This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of
California to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65

-

Service Precaution

1. You should conform to the regulations governing

the product (safety, radio and noise, and other

regulations), and should keep the safety during

servicing by following the safety instructions

described in this manual.

2. Before disassembling the unit, be sure to turn off

the power. Unplugging and plugging the connectors

during power-on mode may damage the ICs inside

the

unit.

3. To protect the pickup unit from electrostatic discharge

during servicing, take an appropriate treatment

(shorting-solder) by referring to "the DISASSEMBLY".

4. After replacing the pickup unit, be sure to check the
grating.
5. Be careful in handling ICs. Some ICs such as MOS

type are so fragile that they can be damaged by

electrostatic

induction.

-

Safety Precautions for those who Service this Unit.

• When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable
results.

Caution:

1. During repair or tests, minimum distance of 13 cm from the focus lens must be kept.

2. During repair or tests, do not view laser beam for 10 seconds or longer.

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replaced only with the same or equivalent type recommended by the manufacture.
Discord used batteries according to the manufacture's instructions.

«
1
2
3
4
...
»

Summary of Contents for DEH-P5950IB/XN/ES











































































Reviews:

No comments

Related manuals for DEH-P5950IB/XN/ES

Perfect Binder D1

Brand: Canon Pages: 99

Brand: NAD Pages: 18

Brand: NAD Pages: 18

Brand: NAD Pages: 18

Brand: NAD Pages: 4

Brand: RadioMaster Pages: 2

Brand: Vauxhall Pages: 137

Brand: Nedap Pages: 21

Brand: Nakamichi Pages: 31

RF340-4PR-ASL-NIS

Brand: GAMA Electronics Pages: 5

Brand: RIP TUNES Pages: 31

Brand: ASIS Technologies Pages: 10

Brand: Blaupunkt Pages: 4

Brand: Goodmans Pages: 32

Brand: Delta Pages: 66

Brand: Aiwa Pages: 37

Brand: Boss Audio Systems Pages: 19

Brand: Onkyo Pages: 159

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands