Black plate (9,1)
<XRD7106-A/N>9
Turning the unit on
%
Press SOURCE to turn the unit on.
When you select a source, the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 14).
%
Press SOURCE to select a source.
Press
SOURCE
repeatedly to switch between
the following sources:
Tuner
Television
DVD player/Multi-
DVD player
Built-in CD player
Multi-
CD player
External unit 1
External unit
2
AUX
Notes
!
In the following cases, the sound source will
not change:
When there is no unit corresponding to the
selected source connected to this unit.
When there is no disc in the unit.
When there is no disc in the DVD player.
When there is no magazine in the multi-
CD player.
When there is no magazine in the multi-
DVD player.
When the AUX (auxiliary input) is set to off
(refer to page 38).
!
External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!
When this unit
s blue/white lead is connected
to the vehicle
s auto-antenna relay control
terminal, the vehicle
s antenna extends when
this unit
s source is turned on. To retract the
antenna, turn the source off.
Loading a disc
1 Press OPEN to open the front panel.
CD loading slot appears.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT
button
#
You can eject a CD by pressing
EJECT
.
#
To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
Notes
!
The built-in CD player plays one standard, 12-
cm or 8-cm CD at a time. Do not use an adap-
ter when playing 8-cm CDs.
!
Do not insert anything other than a CD into
the CD loading slot.
!
There is sometimes a delay between starting
up CD playback and the sound being issued.
When being read,
Format Read
is displayed.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting it again.
Basic Operations
En
9
English
Section
03
