Black plate (33,1)
<XRD7106-A/N>33
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q
factor (curve characteristics) of each currently
selected curve band (
EQ LOW
/
EQ MID
/
EQ HIGH
).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1 Press AUDIO and hold until frequency
and the Q factor (e.g., F 80 Q 1W) appears
in the display.
2 Press AUDIO to select the band for ad-
justment from among low, mid and high.
Press
AUDIO
repeatedly to switch between
the following functions:
Low
Mid
High
Bass
(bass adjustment)
Treble
(treble adjustment)
#
If EQ-EX function has been selected and only
when EQ-EX is turned on and
Custom
is selected
as the equalizer curve, you can switch to
Bass
and
Treble
.
3 Press
c
or
d
to select the desired fre-
quency.
Press
c
or
d
until the desired frequency ap-
pears in the display.
Low:
40
80
100
160
(Hz)
Mid:
200
500
1k
2k
(Hz)
High:
3.15k
8k
10k
12.5k
(Hz)
4 Press
a
or
b
to select the desired Q fac-
tor.
Press
a
or
b
until the desired Q factor ap-
pears in the display.
2N
1N
1W
2W
Note
If you make adjustments,
Custom
curve is up-
dated.
Adjusting bass and treble
Use this function to adjust the bass and treble.
The ability to select the frequency as well as
the level gives you good control over the total
balance of audio.
!
If EQ-EX function has been selected and
EQ-EX turned on and
Custom
selected as
the equalizer curve, you can adjust bass
and treble settings.
Adjusting bass and treble level
You can adjust the bass and treble level.
1 Press AUDIO to select Bass.
Press
AUDIO
until
Bass
appears in the dis-
play.
#
If the treble level has been previously ad-
justed,
Treble
will be displayed.
2 Press
c
or
d
to select bass or treble.
Press
c
and
Bass
is displayed. Press
d
and
Treble
is displayed.
3 Press
a
or
b
to adjust the level.
Each press of
a
or
b
increases or decreases
the selected bass or treble level.
+6
6
is dis-
played as the level is increased or decreased.
Audio Adjustments
En
33
English
Section
08
