Usingthe AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owner
s man-
ual.
SelectingAUX as the source
%
Press SOURCE to select AUX as the
source.
Press
SOURCE
until
AUX
appears in the dis-
play.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, see
Switch-
ing the auxiliary setting
on page 46.
Settingthe AUX title
The title displayed for the
AUX
source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2 Press
a
or
b
to select a letter of the al-
phabet.
Each press of
a
will display a letter of the al-
phabet in
A B C ... X Y Z
, numbers and sym-
bols in
1 2 3 ... > [ ]
order. Each press of
b
will
display a letter in the reverse order, such as
Z
Y X ... C B A
order.
3 Press
d
to move the cursor to the next
character position.
When the letter you want is displayed, press
d
to move the cursor to the next position and
then select the next letter. Press
c
to move
backwards in the display.
4 Move the cursor to the last position by
pressing
d
after entering the title.
When you press
d
one more time, the entered
title is stored in memory.
5 Press BAND to return to the playback
display.
Settingthe level indicator
These are two stored level indicator to select
from.
%
Press EQ and hold to select the level in-
dicator.
Press
EQ
and hold repeatedly to switch be-
tween the following settings:
Level indicator 1
Level indicator 2
Level in-
dicator full
Level indicator off
Other Functions
En
48
Section
11
