1
Press FUNCTION to select AUX1/AUX2.
Press
FUNCTION
repeatedly until
AUX1
/
AUX2
appears in the display.
2
Push MULTI-CONTROL up to turn
AUX1/AUX2 on.
AUX1 :ON
/
AUX2 :ON
appears in the display.
#
To turn AUX off, push
MULTI-CONTROL
down.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
R-SP :FUL
) or subwoofer
(
R-SP :S/W
) connection. If you switch the rear
output setting to
R-SP :S/W
, you can connect
a rear speaker lead directly to a subwoofer
without using an auxiliary amp.
Initially, the unit is set for rear full-range speak-
er connection (
R-SP :FUL
). When rear output is
connected to full range speakers (when
R-SP :FUL
is selected), you can connect other
full range speakers (
P/O :FUL
) or a subwoofer
(
P/O :S/W
) to the RCA rear output.
1
Press FUNCTION to select R-SP.
Press
FUNCTION
repeatedly until
R-SP
ap-
pears in the display.
2
Push MULTI-CONTROL up or down to
switch the rear output setting.
Pushing
MULTI-CONTROL
up or down will
switch between
R-SP :FUL
(full-range speaker)
and
R-SP :S/W
(subwoofer) and that status
will be displayed.
#
When no subwoofer is connected to the rear
output, select
R-SP :FUL
.
#
When a subwoofer is connected to the rear
output, set for subwoofer
R-SP :S/W
.
#
When the rear output setting is
R-SP :S/W
,
you cannot operate the following procedure.
3
Push MULTI-CONTROL left or right to
switch the subwoofer output or rear out-
put.
Pushing
MULTI-CONTROL
left or right will
switch between
P/O :S/W
and
P/O :FUL
and
that status will be displayed.
Notes
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
Using subwoofer output
on page
60).
!
If you change this setting, subwoofer output
in the audio menu return to the factory
settings.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
!
The sound is muted or attenuated,
MUTE
or
ATT
are displayed and no audio adjust-
ment is possible.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1
Press FUNCTION to select TEL.
Press
FUNCTION
repeatedly until
TEL
appears
in the display.
2
Push MULTI-CONTROL left or right to
switch the telephone muting/attenuation.
Pushing
MULTI-CONTROL
left or right will
switch between
TEL ATT
(attenuation) and
TEL MUTE
(muting) and that status will be dis-
played.
Initial Settings
En
65
English
Section
13
