Pioneer DEH-P5200HD, Installation Manual

Page: 2 / 6

<CRD4447-A> <CRD4447-A> <CRD4447-A> 7 <CRD4447-A>
Connecting the unit English
Connecting the unit English
When using a subwoofer without using the optional amplifier
Connecting the unit English
Connecting the unit English
When not connecting a rear speaker lead to a subwoofer
 
 












Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Connect with RCA cables
(sold separately)
Perform these connections
when using the optional
amplifier.
Black (chassis ground)
Connect to a clean, paint-free metal location.
This product
Front output
System remote control
Left Right
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Front speaker Front speaker
Rear speaker Rear speaker
White Gray
Gray/black White/black
Green Violet
Green/black Violet/black
Power amp
(sold separately)
Rear output or subwoofer output
Front speaker
Power amp
(sold separately)
To rear output
or subwoofer
output
To front output
Front speaker
Rear speaker
or subwoofer
Rear speaker
or subwoofer
IP-BUS input (Blue)
IP-BUS cable
Pioneer IP-BUS
accessories
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
Fuse (10 A)
Antenna jack










Left Right
Front speaker Front speaker
White Gray
Gray/black White/black
Green Violet
Green/black Violet/black
Green Violet
Green/black Violet/black
Subwoofer (4 Ω ) Subwoofer (4 Ω )
When using a subwoofer of 70 W (2 Ω ), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Subwoofer
(4 Ω )  2
Not used.
Note
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Antenna jack
This product
Front output
Rear output or subwoofer output
IP-BUS input (Blue)
IP-BUS cable
Pioneer IP-BUS
accessories
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
Fuse (10 A)