Switching the reverse mode
If you do not perform an operation for about
30 seconds, screen indications start to reverse,
and continue reversing every 10 seconds.
1
Use MULTI-CONTROL to select
Reverse mode in the initial setting menu.
Refer to
Adjusting initial settings
on page 28.
2
Press MULTI-CONTROL to turn the re-
verse mode on.
#
To turn the reverse mode off, press
MULTI-CONTROL
again.
Note
You can also turn on or off reverse mode by press-
ing
BAND/ESC
while this unit is turned off. For
more details, refer to
Reverse mode
on page 7.
Switching the ever scroll
When ever scroll is set to on, CD text informa-
tion scrolls continuously in the display. Set to
off if you prefer the information to scroll just
once.
1
Use MULTI-CONTROL to select
Ever-scroll in the initial setting menu.
Refer to
Adjusting initial settings
on page 28.
2
Press MULTI-CONTROL to turn the ever
scroll on.
#
To turn the Ever Scroll off, press
MULTI-CONTROL
again.
Activating the
BT Audio
source
You need to activate the
BT Audio
source in
order to use a Bluetooth audio player.
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1
Use MULTI-CONTROL to select
BT AUDIO in the initial setting menu.
Refer to
Adjusting initial settings
on page 28.
2
Press MULTI-CONTROL to turn the
BT Audio source on.
#
To turn the
BT Audio
source off, press
MULTI-CONTROL
again.
Entering PIN code for
Bluetooth wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is
0000
, but you
can change this in this function.
!
With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
!
You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1
Use MULTI-CONTROL to select
Pin code input in the initial setting menu.
Refer to
Adjusting initial settings
on page 28.
2
Push MULTI-CONTROL up or down to
select a number.
3
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
4
After inputting PIN code (up to 16 di-
gits), press MULTI-CONTROL.
PIN code can be stored in memory.
When you press
MULTI-CONTROL
again on
the same display, the PIN code you entered is
stored in this unit.
#
Pushing
MULTI-CONTROL
right in the confir-
mation display returns you to the PIN code input
display, and you can change the PIN code.
Initial Settings
En
31
English
Section
04
