24
EN
G
L
IS
H
Multi-CD Player
Displaying text information on CD TEXT discs
*
Press DISPLAY.
Press
DISPLAY
repeatedly to switch between the following settings:
Play time –
DISC TITLE
(disc title) –
DISC ARTIST
(disc artist name) –
TRACK TITLE
(track title) –
TRACK ARTIST
(track artist name)
•
If specific information has not been recorded on a CD TEXT disc,
NO XXXX
will be
displayed (e.g.,
NO TRACK TITLE
).
Scrolling text information in the display
This unit can display the first 16 letters only of
DISC TITLE
,
DISC ARTIST
,
TRACK
TITLE
and
TRACK ARTIST
. When the recorded information is longer than 16 letters,
you can scroll the text to the left so that the rest of the title can be seen.
*
Press DISPLAY and hold until the title begins to scroll to the left.
The rest of the title will appear in the display.
Using compression and bass emphasis
You can use these functions only with a multi-CD player that supports them.
Using COMP (compression) and DBE (dynamic bass emphasis) functions lets you
adjust the sound playback quality of the multi-CD player. Each of the functions has a
two-step adjustment. The COMP function balances the output of louder and softer
sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound.
Listen to each of the effects as you select them and use the one that best enhances
the playback of the track or CD that you are listening to.
1. Press FUNCTION to select COMP.
Press
FUNCTION
until
COMP
appears in the display.
•
If the multi-CD player does not support COMP/DBE,
NO COMP
is displayed when
you attempt to select it.
2. Press
8
or
2
to select your favorite setting.
Press
8
or
2
repeatedly to switch between the following settings:
COMP OFF
–
COMP 1
–
COMP 2
–
COMP OFF
–
DBE 1
–
DBE 2
Audio Adjustments
Introduction of audio adjustments
*
Press AUDIO to display the audio function names.
Press
AUDIO
repeatedly to switch between the following audio functions:
FAD
(balance adjustment) –
EQ
(equalizer curve adjustment) –
LOUD
(loudness) –
SUB W
(subwoofer on/off setting) –
80: 0
(subwoofer setting) –
HPF
(high pass filter)
–
BASS
(bass boost) –
FIE
(front image enhancer) –
SLA
(source level adjustment)
•
When the subwoofer controller setting is
P/O :FUL
, you cannot switch to
SUB W
.
(Refer to page 29.)
•
You can select the
80: 0
only when subwoofer output is turned on in
SUB W
.
•
When selecting the FM tuner as the source, you cannot switch to
SLA
.
•
To return to the display of each source, press
BAND
.
Note
•
If you do not operate the audio function within about 30 seconds, the display is automatically
returned to the source display.
햲
Audio display
Shows the audio adjustment
status.
햳
CUSTOM indicator
Shows when custom equalizer
curve is currently selected.
햴
SW indicator
Shows when the subwoofer output
is turned on.
햵
Bass booster indicator
Shows when the bass boost is in
effect.
햶
Loudness indicator
Appears in the display when
loudness is turned on.
햷
FIE indicator
Shows when the front image
enhancer is turned on.
MAN-DEH-P4800MP-GB.fm Page 24 Thursday, September 29, 2005 11:55 AM
