Introduction of audio
adjustments
1
2
3
4
5
6
1
Audio display
Shows the audio adjustment status.
2
CUSTOM indicator
Shows when custom equalizer curve is cur-
rently selected.
3
SW indicator
Shows when the subwoofer output is turned
on.
4
Bass booster indicator
Shows when the bass boost is in effect.
5
Loudness indicator
Appears in the display when loudness is
turned on.
6
FIE indicator
Shows when the front image enhancer is
turned on.
%
Press AUDIO to display the audio func-
tion names.
Press
AUDIO
repeatedly to switch between
the following audio functions:
FAD
(balance adjustment)
EQ
(equalizer
curve adjustment)
LOUD
(loudness)
SUB W
(subwoofer on/off setting)
80: 0
(subwoofer setting)
HPF
(high pass filter)
BASS
(bass boost)
FIE
(front image enhan-
cer)
SLA
(source level adjustment)
#
When the subwoofer controller setting is
P/O :FUL
, you cannot switch to
SUB W
. (Refer to
page 36.)
#
You can select the
80: 0
only when subwoofer
output is turned on in
SUB W
.
#
When selecting the FMtuner as the source,
you cannot switch to
SLA
.
#
To return to the display of each source, press
BAND
.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Press AUDIO to select FAD.
Press
AUDIO
until
FAD
appears in the display.
#
If the balance setting has been previously ad-
justed,
BAL
will be displayed.
2 Press
a
or
b
to adjust front/rear speak-
er balance.
Each press of
a
or
b
moves the front/rear
speaker balance towards the front or the rear.
FAD :F15
FAD :R15
is displayed as the front/
rear speaker balance moves from front to rear.
#
FAD : 0
is the proper setting when only two
speakers are used.
#
When the rear output setting is
R-SP :S/W
,
you cannot adjust front/rear speaker balance.
Refer to
Setting the rear output and subwoofer
controller
on page 36.
Audio Adjustments
En
30
Section
08
